|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-05-2019, 03:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: AZ and WA
Posts: 764
|
Question on Floor Plate screws
I don't have my Standards with me. What finish should the screws have on the steering column floor plates?
|
01-05-2019, 04:50 PM | #2 |
Senior Member
Join Date: Feb 2014
Location: Lake Mills, WI
Posts: 251
|
Re: Question on Floor Plate screws
Sponsored Links (Register now to hide all advertisements)
The Judging Standards say , " All two piece metal plates were fastened with two #12-24 x 1/2" screws with #10 oval heads one #6 x 3/4" oval head wood screw and countersunk trim washers. The screws and washers were either nickle plated or raven finished."
__________________
Always one bad decision away from a good time. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|