The Ford Barn

Fred A · 11-05-2015, 04:42 PM

I have a block that passed pressure and magnetic inspection. Living in Los Angeles Valley would like to have the block baked. Who does it? Thanks: Fred A

ford38v8 · 11-05-2015, 07:06 PM

Quote:

Originally Posted by Fred A

I have a block that passed pressure and magnetic inspection. Living in Los Angeles Valley would like to have the block baked. Who does it? Thanks: Fred A

Fred, give a call down to C&G. They would surely know where to send you.

cmbrucew · 11-05-2015, 08:07 PM

FredA
Have you talked to Mike Herman with HandH flatheads. They are not too far from you.
818 248 2371
Bruce

ford38v8 · 11-05-2015, 10:06 PM

Quote:

Originally Posted by cmbrucew

FredA
Have you talked to Mike Herman with HandH flatheads. They are not too far from you.
818 248 2371
Bruce

What's with H&H? Website is suspended. What's the story?

Floyd · 11-06-2015, 02:34 PM

I have my stuff , including blocks and heads stripped at a good old fashioned "hot tank" stripper in Van Neys Ca. This is a real place and does the phosphoric acid stripping. May be the only one left. Jay Leno uses this place also. L & M Stripping 818-983-1200. Great guys, really old place. Always cool car stuff in process. Not expensive.
Just my opinion.

Sam A. · 11-06-2015, 10:39 PM

Sponsored Links (Register now to hide all advertisements)

Jim Grubbs Motorsport in Valencia.

deucemac · 11-08-2015, 01:31 AM

Valley Head Service

Fred A · 11-08-2015, 07:22 AM

Thanks for the leads. Even though I'm close by, decades of trying to have H&H do a couple of engines, the results have made relations strained. Larry at Valley Head Service is nearby. This could be the one. Valencia also stands to be a good location being out of the evil clutches of municipal LA.
Fred A

11-05-2015, 04:42 PM	#1
Fred A Senior Member Join Date: May 2010 Location: Encino California, near Burbank Posts: 935	Where To Shake-N-Bake My Block? I have a block that passed pressure and magnetic inspection. Living in Los Angeles Valley would like to have the block baked. Who does it? Thanks: Fred A Last edited by Fred A; 11-05-2015 at 05:41 PM.

11-05-2015, 08:07 PM	#3
cmbrucew Senior Member Join Date: Dec 2010 Location: North of sandy ago, CA. Posts: 2,064	Re: Where To Shake-N-Bake My Block? FredA Have you talked to Mike Herman with HandH flatheads. They are not too far from you. 818 248 2371 Bruce __________________ Works good Lasts long time

11-06-2015, 02:34 PM	#5
Floyd Senior Member Join Date: May 2010 Posts: 468	Re: Where To Shake-N-Bake My Block? I have my stuff , including blocks and heads stripped at a good old fashioned "hot tank" stripper in Van Neys Ca. This is a real place and does the phosphoric acid stripping. May be the only one left. Jay Leno uses this place also. L & M Stripping 818-983-1200. Great guys, really old place. Always cool car stuff in process. Not expensive. Just my opinion.

11-06-2015, 10:39 PM	#6
Sam A. Member Join Date: Jun 2010 Location: Burbank, Ca. Posts: 36	Re: Where To Shake-N-Bake My Block? Sponsored Links (Register now to hide all advertisements) Jim Grubbs Motorsport in Valencia.

11-08-2015, 01:31 AM	#7
deucemac Senior Member Join Date: May 2010 Location: Tehachapi, Ca. Posts: 208	Re: Where To Shake-N-Bake My Block? Valley Head Service

11-08-2015, 07:22 AM	#8
Fred A Senior Member Join Date: May 2010 Location: Encino California, near Burbank Posts: 935	Re: Where To Shake-N-Bake My Block? Thanks for the leads. Even though I'm close by, decades of trying to have H&H do a couple of engines, the results have made relations strained. Larry at Valley Head Service is nearby. This could be the one. Valencia also stands to be a good location being out of the evil clutches of municipal LA. Fred A