|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-21-2019, 11:29 PM | #1 |
Senior Member
Join Date: Apr 2013
Location: Big pine Ca 93513
Posts: 797
|
32 to 48 v8- are fuel pumps the same
Can I buy any rebuilt v8 fuel pump 32 to 48 and expect it to be correct ??
|
09-21-2019, 11:37 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,662
|
Re: 32 to 48 v8- are fuel pumps the same
That's a pretty wide open question. Can you narrow it down some?
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
09-21-2019, 11:49 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,046
|
Re: 32 to 48 v8- are fuel pumps the same
The Green Bible lists 59A 9350-A as fitting 1932-1948 passenger 90 and 100 HP. This says it should work but not necessarily be correct for a high point restoration.
Charlie Stephens |
09-22-2019, 12:51 AM | #4 |
Senior Member
|
Re: 32 to 48 v8- are fuel pumps the same
Been a long time but I think I bought what was listed as a 34 pump for my 46 59 AB, does not have the sediment bowl.
|
09-22-2019, 10:05 AM | #5 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,113
|
Re: 32 to 48 v8- are fuel pumps the same
Only with '34 or later intake manifolds and fuel pump stands/oil filler tubes. '32 and '32 intake manifolds require modifications plus the '34 and up fuel pump stand/oil filler tube and a different fuel pump push rod. The fuel pump to carburetor line on '32-'33s would also have to be modified or replaced.
It would be helpful if you stated what engine and intake manifold you have in mind as well as what you mean by "correct"; functionally speaking or as built? |
09-22-2019, 04:27 PM | #6 |
Senior Member
Join Date: Apr 2013
Location: Big pine Ca 93513
Posts: 797
|
Re: 32 to 48 v8- are fuel pumps the same
Sponsored Links (Register now to hide all advertisements)
|
09-22-2019, 04:38 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,046
|
Re: 32 to 48 v8- are fuel pumps the same
Quote:
Charlie Stephens Last edited by Charlie Stephens; 09-22-2019 at 04:45 PM. |
|
09-24-2019, 07:10 PM | #8 |
Senior Member
Join Date: Mar 2014
Location: Webster, NY
Posts: 215
|
Re: 32 to 48 v8- are fuel pumps the same
Better choice is to have charlie ny rebuild it.
|
09-25-2019, 01:09 PM | #9 |
Senior Member
Join Date: Apr 2013
Location: Big pine Ca 93513
Posts: 797
|
Re: 32 to 48 v8- are fuel pumps the same
Found out what I wanted to know ..34 to 48 fuel pump for caustic new fuels will work just fine..thanks much..my pump looks new and shiny brite thot maybe from china but i guess a rebuilt type without sediment bowl..sc
|
09-25-2019, 03:41 PM | #10 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: 32 to 48 v8- are fuel pumps the same
Fuel pumps many be similar, but the push rods vary between years, and whether the intake manifold is iron or aluminum, and the mount is correct. Any small variance can have a big effect on performance.
|
09-26-2019, 07:24 PM | #11 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,063
|
Re: 32 to 48 v8- are fuel pumps the same
Don't the pumps with the glass bowl start later. Like in the 40s. I like them and run one on my 38. 36 has the standard no bowl.
An old wise/wives tale but if you replace the gasket with a cut playing card you add pressure. Maybe so... not likely. But I like the ace of spades or the 2 of diamonds. Last edited by Tinker; 09-26-2019 at 07:30 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|