The Ford Barn

Bud · 09-16-2013, 10:08 PM

Pictured here are two horns, the right hand horn is a Model T Horn for 1922 to 1925 per page 322 of the book "Model T Ford the Car that Changed the World". This book also states the T horn with a different bracket fits 1926 and 1927. The other horn looks to me like a Sparton due to the tag, plus I recognize the motor frame which looks very similar to a Model A Sparton motor and motor frame. I did not try to see if either horn would function. As is, but I think they would clean up. Shipping would be additional depending on distance. Thanks for looking.

New Price: $45

Bud · 09-19-2013, 07:03 PM

btt

d. · 09-20-2013, 03:37 PM

just FYI...second horn is not Model A Sparton. The electrical terminals are under the motor cover on a Model A, not external as pictured.

Bud · 09-20-2013, 09:37 PM

I just meant the motor and motor frame, not how it's wired externally.

Rowdy · 09-21-2013, 01:10 AM

Looks like a different dia body flange than the Model A horn also. Rod

Bud · 09-23-2013, 11:32 AM

Sponsored Links (Register now to hide all advertisements)

Yes, I believe you are correct. I am only referring to the motor rotor and the U-shaped frame it sits in. I only mentioned that in case someone is looking for some bits and pieces for an A horn. I only mean that it's a parts horn.

Bud · 09-24-2013, 07:56 PM

See new price @ $45. If anyone can use them, let me know.

Bud · 09-26-2013, 08:47 PM

I cleaned the mud off the Model T horn. I did not see a Ford Script, but it has a lot of enamel paint and it might still be there. The horn conforms to these dimensions: 10" total length, 8" projector length, 3.0" projector diameter. On the back motor cover it has "MADE IN", below that is a diamond <>, and below that is "USA". If it is anything like a Model A horn, a diamond indicates AMES made by the Heinze Electric Company. It definitely is a Model T horn because I identified it from the photo in the book I noted. Please note that this horn is not pristine. It has some dings in the front edge of the projector and a small dent in the projector body, plus a bit of surface rust.
I'll take $40 plus shipping. Thanks.

Stinch · 09-26-2013, 09:41 PM

PM sent

Bud · 09-27-2013, 11:29 AM

Sold Pending Payment.

09-16-2013, 10:08 PM	#1
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	1922-25 T Horn plus a Sparton Horn City: Fort Loramie State: OH Price: $75 Pictured here are two horns, the right hand horn is a Model T Horn for 1922 to 1925 per page 322 of the book "Model T Ford the Car that Changed the World". This book also states the T horn with a different bracket fits 1926 and 1927. The other horn looks to me like a Sparton due to the tag, plus I recognize the motor frame which looks very similar to a Model A Sparton motor and motor frame. I did not try to see if either horn would function. As is, but I think they would clean up. Shipping would be additional depending on distance. Thanks for looking. New Price: $45 Last edited by Bud; 08-18-2015 at 07:21 PM.

09-19-2013, 07:03 PM	#2
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn btt

09-20-2013, 03:37 PM	#3
d. Senior Member Join Date: May 2010 Location: Raleigh, NC Posts: 510	Re: 1922-25 T Horn plus a Sparton Horn just FYI...second horn is not Model A Sparton. The electrical terminals are under the motor cover on a Model A, not external as pictured.

09-20-2013, 09:37 PM	#4
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn I just meant the motor and motor frame, not how it's wired externally.

09-21-2013, 01:10 AM	#5
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 1922-25 T Horn plus a Sparton Horn Looks like a different dia body flange than the Model A horn also. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

09-23-2013, 11:32 AM	#6
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn Sponsored Links (Register now to hide all advertisements) Yes, I believe you are correct. I am only referring to the motor rotor and the U-shaped frame it sits in. I only mentioned that in case someone is looking for some bits and pieces for an A horn. I only mean that it's a parts horn.

09-24-2013, 07:56 PM	#7
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn See new price @ $45. If anyone can use them, let me know.

09-26-2013, 08:47 PM	#8
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn I cleaned the mud off the Model T horn. I did not see a Ford Script, but it has a lot of enamel paint and it might still be there. The horn conforms to these dimensions: 10" total length, 8" projector length, 3.0" projector diameter. On the back motor cover it has "MADE IN", below that is a diamond <>, and below that is "USA". If it is anything like a Model A horn, a diamond indicates AMES made by the Heinze Electric Company. It definitely is a Model T horn because I identified it from the photo in the book I noted. Please note that this horn is not pristine. It has some dings in the front edge of the projector and a small dent in the projector body, plus a bit of surface rust. I'll take $40 plus shipping. Thanks.

09-26-2013, 09:41 PM	#9
Stinch Senior Member Join Date: May 2010 Location: Connecticut Posts: 220	Re: 1922-25 T Horn plus a Sparton Horn PM sent __________________ E30 68-B Cabriolet

09-27-2013, 11:29 AM	#10
Bud Senior Member Join Date: May 2010 Location: Ohio Posts: 819	Re: 1922-25 T Horn plus a Sparton Horn Sold Pending Payment.