|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-20-2014, 10:31 AM | #1 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
New block update 3.
I just finished boring the cylinders in the first sample block. They came out very well. Not a mark in them. I cut them .005 under so they can be honed to size. That pretty much does it for the top end.
Later today I plan to set the block up in an HMC and begin machining on the sides and ends. After this, I will be able to test fit most, if not all, external bolt-on parts. I happen to be running flywheel housings and heads for Snyder right now so that will give me fresh parts in house to bolt on. That will leave the cam and crank journals and the main oil galley. I will be sending pics out to people who have requested them. Tod |
05-20-2014, 10:43 AM | #2 |
Senior Member
Join Date: May 2010
Location: Lexington, Ohio
Posts: 782
|
Re: New block update 3.
Thanks for the update Tod. Very exciting!
__________________
1929 Model A Ford Coupe |
Sponsored Links (Register now to hide all advertisements) |
|
05-20-2014, 10:49 AM | #3 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: New block update 3.
Great work Tod! I for one thank you for doing that which is needed --esp. since so few today have the skills to even try what you're doing.
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
05-20-2014, 11:21 AM | #4 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: New block update 3.
|
05-20-2014, 04:58 PM | #5 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: New block update 3.
|
05-20-2014, 05:07 PM | #6 |
Senior Member
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
|
Re: New block update 3.
Sponsored Links (Register now to hide all advertisements)
__________________
-Mike Late 31' Ford Model A Tudor, Miss Daisy I don't work on cars --I'm learning about my Model A. Cleveland, Ohio |
05-20-2014, 05:16 PM | #7 |
Senior Member
|
Re: New block update 3.
Nothing is difficult if you know how. The know how is difficult.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
05-20-2014, 07:56 PM | #8 |
Senior Member
Join Date: Oct 2012
Location: beautiful down town Passaic NJ
Posts: 293
|
Re: New block update 3.
thank you its amazing I cant get a garbage can lid to fit properly let alone cast and machine a piece of history !
|
05-21-2014, 10:58 AM | #9 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,096
|
Re: New block update 3.
tod, no need to allow .005 to be honed. i only leave .0005 - .001, thus requiring less honing, which is hard work if doing manually. goog luck on the rest of the project!
|
05-21-2014, 11:19 AM | #10 | |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: New block update 3.
Quote:
Thanks for the input Jim. On this first one I wanted to make sure it could be take out to stock size even if it needs a light boring first. This morning, in between running production and running some errands I cut the water outlet on the side. I will be spending today and this evening getting the sides and ends cut. Tod |
|
05-21-2014, 05:30 PM | #11 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: New block update 3.
Today, in between production, and at the end of the day, I was able to finish up the side water-outlet face and bolt on a borrowed water-neck. Looks good. Then I faced the valve cover side and drilled/tapped all those holes. I need to get some bolts to fasten everything on but I did put studs in and fasten on an intake and one of my cast iron tube headers. Everything looks good on that side also. So far, so good.
Sorry it is taking so long but my primary use of machines is production. It is time consuming to put something in without fixturing and plow through it. It will get there. Please be patient. Tod |
05-21-2014, 06:53 PM | #12 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: New block update 3.
"Sorry it is taking so long but my primary use of machines is production. It is time consuming to put something in without fixturing and plow through it. It will get there. Please be patient."
Not a problem. We've only been waiting 85 years for a new engine. LOL Glad to hear it going well so far. |
05-21-2014, 08:47 PM | #13 |
BANNED
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
|
Re: New block update 3.
We will continue to be patient; you are on our side! A very worthwhile endeavor indeed; keep up the good work.
__________________
'31 180A |
05-21-2014, 09:31 PM | #14 |
Senior Member
Join Date: Nov 2011
Location: Arkansas & Alaska
Posts: 648
|
Re: New block update 3.
It sounds like good news Tod. I've been following along with this for a long time and can't remember what kind of crank you plan to use in this new block. Is it pressure feed or original type. Somebody bring me up to speed.
|
05-21-2014, 10:45 PM | #15 |
Senior Member
Join Date: May 2010
Location: Lincolnton, Georgia
Posts: 723
|
Re: New block update 3.
Yea, I'm cranking these things by the dozen in my little garage
P.S. what I would really like is a diesel engine that looks like a Ford Flat head four that is about 200 HP gets 45 mpg and still sounds like a Model A Still dreaming in WV soon to be head south dusty Last edited by Dusty; 05-21-2014 at 11:04 PM. |
05-22-2014, 05:22 AM | #16 |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: New block update 3.
|
05-22-2014, 07:02 AM | #17 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: New block update 3.
thats great Tod
three successful updates so far in the same month of the same year... wow the impossible now seems obtainable thanks for the update are you able to post pics at times?? |
05-22-2014, 07:56 AM | #18 | |
Senior Member
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
|
Re: New block update 3.
Quote:
I did cut the front cover surface to length but didn't have time to drill and tap the cover bolt holes. I measured the length against a stock block and it looks good. Tod |
|
05-22-2014, 09:19 AM | #19 |
Senior Member
Join Date: May 2010
Location: Orange, Ca.
Posts: 197
|
Re: New block update 3.
Pictures....YAAAAAAAAAY!!!!!!
I can't wait!!!!!!! . |
05-22-2014, 09:55 AM | #20 |
Senior Member
Join Date: May 2010
Location: Claremont, CA 91711
Posts: 244
|
Re: New block update 3.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|