The Ford Barn

FlatheadTed · 07-20-2011, 08:42 PM

Who supplies the linkage for setting up twin Carbs Thank any one .

41ford1 · 07-20-2011, 09:33 PM

Speedway is one source. Also Ken CT on this forum might have components. I had the best results running them in tandem with straight linkage. I could not get a pair of 94s to run well progressively. I was not able to get the secondary to seal well when closed.

FlatheadTed · 07-20-2011, 11:56 PM

Thanks 41, Did you run a adjustable link between them .Ted

Joe AZ · 07-21-2011, 12:40 AM

Charlie Price in Florida has linkage for twin carbs.
Joe

41ford1 · 07-21-2011, 04:35 AM

Yes the link is adjustable. Set the throttle arms leaning forward at 45°. Sync the carbs at idle with out the link connected. Then adjust the link to match the position of the arms. You should be good to go.

Ray With · 07-21-2011, 07:14 AM

Sponsored Links (Register now to hide all advertisements)

I have used a lot of linkage and I would think Speedways set up is about as good as they come for moderate priced parts.

Mike51Merc · 07-21-2011, 12:44 PM

www.vintagespeed.com

Roger/Sacramento · 07-21-2011, 01:45 PM

I made my from brass rod and aluminum....takes time but not that hard. And you can be creative.

FlatheadTed · 07-21-2011, 03:55 PM

Thanks one and all .Ted

Bassman/NZ · 07-21-2011, 04:02 PM

Hi Ted,
I got my link from Speedway.

I'm coming up to Orcland for a week in Sept. Might give you a yodel.

FlatheadTed · 07-22-2011, 04:39 AM

Thanks Baseman that's a nice set up I might have to do it Rodgers way for the sake of time ,Look me up when you come to Orklend

stromberg81 · 07-25-2011, 05:23 PM

Roger, the guy that put that all together for you did a really nice job..
Duane.

07-20-2011, 08:42 PM	#1
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	twin carbs Who supplies the linkage for setting up twin Carbs Thank any one . __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,

07-20-2011, 09:33 PM	#2
41ford1 Senior Member Join Date: May 2010 Location: ManchVegas, New Hampshah Posts: 1,589	Re: twin carbs Speedway is one source. Also Ken CT on this forum might have components. I had the best results running them in tandem with straight linkage. I could not get a pair of 94s to run well progressively. I was not able to get the secondary to seal well when closed.

07-20-2011, 11:56 PM	#3
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: twin carbs Thanks 41, Did you run a adjustable link between them .Ted __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,

07-21-2011, 12:40 AM	#4
Joe AZ Senior Member Join Date: May 2010 Location: Prescott, WI Posts: 336	Re: twin carbs Charlie Price in Florida has linkage for twin carbs. Joe

07-21-2011, 04:35 AM	#5
41ford1 Senior Member Join Date: May 2010 Location: ManchVegas, New Hampshah Posts: 1,589	Re: twin carbs Yes the link is adjustable. Set the throttle arms leaning forward at 45°. Sync the carbs at idle with out the link connected. Then adjust the link to match the position of the arms. You should be good to go.

07-21-2011, 07:14 AM	#6
Ray With Senior Member Join Date: Jul 2011 Location: Montgomery,Texas Posts: 115	Re: twin carbs Sponsored Links (Register now to hide all advertisements) I have used a lot of linkage and I would think Speedways set up is about as good as they come for moderate priced parts. __________________ Hotrodchat's Picture Gallery 26,000 pictures to keep you looking

07-21-2011, 12:44 PM	#7
Mike51Merc Senior Member Join Date: May 2010 Location: Northeast Pennsylvania Posts: 1,582	Re: twin carbs www.vintagespeed.com

07-21-2011, 03:55 PM	#9
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: twin carbs Thanks one and all .Ted __________________ http://www.flatheadted.com Flathead Ted brake Floaters , Last edited by FlatheadTed; 07-22-2011 at 04:37 AM.

07-21-2011, 04:02 PM	#10
Bassman/NZ Senior Member Join Date: May 2010 Location: Napier, New Zealand Posts: 2,001	Re: twin carbs Hi Ted, I got my link from Speedway. I'm coming up to Orcland for a week in Sept. Might give you a yodel.

07-22-2011, 04:39 AM	#11
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: twin carbs Thanks Baseman that's a nice set up I might have to do it Rodgers way for the sake of time ,Look me up when you come to Orklend __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,

07-25-2011, 05:23 PM	#12
stromberg81 Member Join Date: Nov 2010 Location: Sacramento Posts: 47	Re: twin carbs Roger, the guy that put that all together for you did a really nice job.. Duane. __________________ ..Commitment is a 100%..