The Ford Barn

OLDTINDEALER · 02-26-2015, 09:54 PM

Still more I need help to ID.
Top is a mercury/lincoln set marked FY XXX
bottom is hurd marked FK XXX shaft is 1 3/4 inches long

Kurt in NJ · 02-26-2015, 10:03 PM

the lid on the larger one is a style of 47-48, and 50s made earlier replacements

Lawrie · 02-26-2015, 10:19 PM

bottom one looks like the door lock on my 33.
Lawrie

gearhead1952 · 02-27-2015, 10:07 AM

Top one is an ignition switch lock cylinder and lower is a door lock cylinder. From what I can see look like 51-52 f1 truck. Not sure tho if the shaft on the door lock is the right length for an f1.

32phil · 02-27-2015, 12:55 PM

Sponsored Links (Register now to hide all advertisements)

Top cylinder is a later style that will fit in 32-up door locks, trunk/rumble/tailgate handles. It may fit in some post war tuck applications. It differs from the original/early style a it is stainless cad on the face while the early units were polished chrome. The door lock is a later style (post 42) and I believe it would be matched with another keyed alike cylinder for the opposite door. Door lock cylinders did not have a sliding cover until 37 or 38. I'm doing my best as to the years of stuff because I am in Florida until April 1st. and do not have my reference material with me.

02-26-2015, 10:03 PM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,157	Re: NOS key lock id help the lid on the larger one is a style of 47-48, and 50s made earlier replacements

02-26-2015, 10:19 PM	#3
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,215	Re: NOS key lock id help bottom one looks like the door lock on my 33. Lawrie

02-27-2015, 10:07 AM	#4
gearhead1952 Senior Member Join Date: May 2010 Location: Julesburg, Colorado Posts: 714	Re: NOS key lock id help Top one is an ignition switch lock cylinder and lower is a door lock cylinder. From what I can see look like 51-52 f1 truck. Not sure tho if the shaft on the door lock is the right length for an f1.

02-27-2015, 12:55 PM	#5
32phil Senior Member Join Date: May 2010 Location: Montgomery, NY & Port St. Lucie Florida Posts: 935	Re: NOS key lock id help Sponsored Links (Register now to hide all advertisements) Top cylinder is a later style that will fit in 32-up door locks, trunk/rumble/tailgate handles. It may fit in some post war tuck applications. It differs from the original/early style a it is stainless cad on the face while the early units were polished chrome. The door lock is a later style (post 42) and I believe it would be matched with another keyed alike cylinder for the opposite door. Door lock cylinders did not have a sliding cover until 37 or 38. I'm doing my best as to the years of stuff because I am in Florida until April 1st. and do not have my reference material with me. __________________ Early Ford Lock & Key Service https://www.fordbarn.com/forum/showthread.php?t=46583 Last edited by 32phil; 02-27-2015 at 12:58 PM. Reason: additional info