36 passenger side hinge pin mirror

[mrtexas]

Anyone have one they can see out of from the driver's side? Anyone modified one to make it usable?

[ford38v8]

You may have it installed incorrectly. I never heard of a hinge pin mirror that didn't provide good visibility.

[mrtexas]

Originally Posted by ford38v8

You may have it installed incorrectly. I never heard of a hinge pin mirror that didn't provide good visibility.

Oops, meant to say passenger side mirror as viewed from the driver's side

[ford38v8]

I don't see the problem there either. What is blocking your vision of the mirror? I'll admit a small difference between the '36 and '38 mirror arms, yours is straight, mine is curved, but the positions of the mirrors are very similar, or so I thought?

[flatheadfan]

I have a '35 and a '36 and in both cases I have found the passenger mirror to be totally useless. Maybe someone else found a way to adjust it but I could find no way it could be to allow for driver use.

Tom

[dean333]

Sponsored Links (Register now to hide all advertisements)

I can see out of my right side mirror. It's a small mirror yes, but usable.

[DICK SPADARO]

There is no easy fix to this issue outside of installing west coast truck mirrors on the passenger side. The best results have been obtained by swapping the 4" head mirror out for a redesigned 4" Convex style mirror giving a more wider view range.

[blucar]

A very simple solution to limited visibility on the right side is to purchase a round convex "fish eye" mirror from a local parts store.. Most of the round style will be approximately 4.25".. Remove the double stick tape from the convex mirror and glue it over the original mirror using clear silicone.
I always look for a mirror that has a metal edge in lieu of a black plastic edge..
The convex mirror will provide full vision on the right side. Some distortion will occur, however, that is easy to overcome..
I've used this type of mirror modification on many older vehicles, early Ford V8's and F-100's. works every time.
The attached pix are of the mirror on the right side on my '39 conv cpe.. The mirrors are after market "Swan" mirrors.. I did not like the looks of the door pin mirrors. I utilized the mounting holes for the accessory wind wings to attach the custom made mirror mounts..

[coupe5w36]

I've got hinge pin mirrors on both sides & have no trouble seeing out of them both. About a year ago I put a convex head on the passenger side & really like it. Both mirrors have a gently curved arm and came with all the bits when I purchased the project. Quite possibly they're not '36, but they work & (to me) look great.

[Walt Dupont--Me.]

Originally Posted by blucar

A very simple solution to limited visibility on the right side is to purchase a round convex "fish eye" mirror from a local parts store.. Most of the round style will be approximately 4.25".. Remove the double stick tape from the convex mirror and glue it over the original mirror using clear silicone.
I always look for a mirror that has a metal edge in lieu of a black plastic edge..
The convex mirror will provide full vision on the right side. Some distortion will occur, however, that is easy to overcome..
I've used this type of mirror modification on many older vehicles, early Ford V8's and F-100's. works every time.
The attached pix are of the mirror on the right side on my '39 conv cpe.. The mirrors are after market "Swan" mirrors.. I did not like the looks of the door pin mirrors. I utilized the mounting holes for the accessory wind wings to attach the custom made mirror mounts..

Does your 39 convertible coupe have a rumble seat? I'd love to see it. I've only seen one in real life. Walt