|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-27-2015, 06:14 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Rebuilding Vacuum Windshield Wipers
I have two Trico wiper motors that I am rebuilding, and both once worked a few years ago. (These are not the early motors, which used two screws to fasten the cover of the reversing lever assembly to the body.) I have used 400-grit paper on the air chambers, and I have blown out the air passages.
I have oiled the paddles and used Vaseline in the air chambers. There does not appear to be excessive resistance when I move the paddles back and forth manually. When I apply engine vacuum to the motors, I do not detect any hissing (leaks), but I don't get any movement of the paddles. Is there a way in which one can isolate whether the paddles are at fault? (Bratton's tells me that they no longer have a supplier for the paddle rebuild kits.) Gordon |
09-27-2015, 07:39 PM | #2 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Rebuilding Vacuum Windshield Wipers
|
Sponsored Links (Register now to hide all advertisements) |
|
09-27-2015, 08:10 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Rebuilding Vacuum Windshield Wipers
Thanks for the lead, Mitch. I am going to try my best at rebuilding them myself, but if that fails, I at least have place to which to turn.
I like the web site, and I have been told that about 95% of all wiper motor problems are due to faulty paddles. Col. Biggs |
09-27-2015, 08:14 PM | #4 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Rebuilding Vacuum Windshield Wipers
your welcome Col.
maybe he can help you out with some rebuild parts |
09-27-2015, 08:32 PM | #5 |
Senior Member
Join Date: Jul 2011
Location: Southwestern Connecticut
Posts: 931
|
Re: Rebuilding Vacuum Windshield Wipers
I agree with Mitch, if you can't get it going yourself, Ficken is the place to go. Great work, and I got a pretty fast turn around time.
Ken
__________________
Style beats speed any day, and with a lot fewer tickets. |
09-27-2015, 09:25 PM | #6 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,521
|
Re: Rebuilding Vacuum Windshield Wipers
Sponsored Links (Register now to hide all advertisements)
|
09-27-2015, 09:39 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Re: Rebuilding Vacuum Windshield Wipers
Hello, Brent!
Their site says that they do not sell parts. I might have to ask that if I wish to keep my parts for spares (except for the paddles), whether they would accept that. My best to your dad, whom I have not seen in some time now. Le Colonel |
09-27-2015, 11:18 PM | #8 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Rebuilding Vacuum Windshield Wipers
I haven't worked on a vacuum wiper in many years, but doesn't they have a piece of leather riveted between two metal plates?
If the leather is worn out, you should be able to grind out the rivets and cut a new piece of leather, and rivet it in. |
09-27-2015, 11:36 PM | #9 |
Senior Member
|
Re: Rebuilding Vacuum Windshield Wipers
Wiper exploded view;
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
09-27-2015, 11:45 PM | #10 |
BANNED
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
|
Re: Rebuilding Vacuum Windshield Wipers
Mike's diagram says to use sewing machine oil
i use vacuum pump oil
__________________
'31 180A |
09-27-2015, 11:56 PM | #11 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Rebuilding Vacuum Windshield Wipers
I agree that a liquid oil would be much better than Vaseline. I think I used ATF many years ago on my 1950 Studebaker wiper.
DO NOT use WD-40, as it can do damage to pot metal parts. |
09-28-2015, 01:42 AM | #12 |
Member
Join Date: Sep 2015
Posts: 39
|
Re: Rebuilding Vacuum Windshield Wipers
You should be able to manually rotate the shaft and feel the air flow out of the port. If you don't feel a pretty good air flow when you rotate the shaft, you've probably got a bad wiper.
|
09-28-2015, 02:28 AM | #13 |
Senior Member
|
Re: Rebuilding Vacuum Windshield Wipers
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
09-28-2015, 07:21 AM | #14 |
Member
Join Date: May 2010
Posts: 61
|
Re: Rebuilding Vacuum Windshield Wipers
Hi, I had a similar experience rebuilding my wipers. Called Flicken and they were very helpful. Person I spoke with told me to look for wipers with a serial number after 1936 I think . It might be later , the later the better. I was told the early one,s the casting actual warps and they cant be rebuilt.
|
09-28-2015, 09:28 AM | #15 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,472
|
Re: Rebuilding Vacuum Windshield Wipers
Having rebuilt several Trico motors, I can tell you that the paddle should be a very snug fit inside the motor's lower body.
Also wipe a thin film of grease on the sliding parts of the ON-OFF valve. Lithium grease or a synthetic grease works well. Liquids or greases that revert to liquids are poor choices because the liquid will be sucked into the engine in a short time. Be especially careful when placing new gaskets between the upper & lower bodies. These gaskets are fragile and must not leak. Another problem that often arises is the wiper stops at one end of its stroke. There is a round seal on the paddle and this must seal tightly against the upper motor body to cause a reverse movement of the wiper.
__________________
Bob Bidonde |
09-28-2015, 12:51 PM | #16 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Rebuilding Vacuum Windshield Wipers
Many good thoughts, for which I thank you all. I especially like the lubrication info (brake fluid would not be my choice!), and the parts diagram.
Is it possible to learn anything, if I were to attach a hand-operated vacuum pump to the inlet nozzle? Should it hold the vacuum, and then release it when the paddle is turned in a particular direction? In other words, can the pump duplicate engine vacuum for testing purposes? The top of the paddle (installed) fits into the small recess in the upper plate. Is it possible that I don't have a good seal there? Maybe I could place some powder in the recess cavity to see if contact is being made. Again, my thanks for your inputs. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|