The Ford Barn

B-O-B · 03-02-2014, 09:42 PM

Are any Ford Barners living in or near Walker ,Iowa. I'm interested in contacting Lowell Meyers of walker engine rebuilding. It is my understanding that he rebuilt the 21 stud engine in my 34 roadster & I would like to know what he installed. B T W I got it fired off last night after it had sat for 10 or more years. Runs guoood

JT FORD · 03-02-2014, 09:59 PM

I'm sorry but Lowell past away sometime ago.........

RPM · 03-02-2014, 10:03 PM

Lowell passed away last July. His youngest son Bill is a friend and has a shop nearby. His shop # is 319 224 3731. Tell him Woodroe sent you. Also, many of Lowell's rebuilds were done by Ron Tegee of Cedar Rapids. I have a couple of his engines fresh on the stands. He is now retired but Bill should have the#. RPM

B-O-B · 03-03-2014, 08:04 AM

Thanks so much guys. Sorry to hear about Lowells passing.I will try to get in touch with his son but not holding much hope on finding out what is in this engine. The fellow I bought the car from is also the son of the man that owned this engine & car.
Sure has a strong sound & starts right up altho @ present I'm chasing excessive fuel consumption but will get it figured out.
Thanks again fellows.
B-O-B

john worden · 03-03-2014, 08:31 AM

Sponsored Links (Register now to hide all advertisements)

Sorry to hear that Lowell has passed on. He was an excellent source of information and parts.
John

03-02-2014, 09:59 PM	#2
JT FORD Senior Member Join Date: May 2010 Location: N.W. Iowa Posts: 306	Re: walker Iowa I'm sorry but Lowell past away sometime ago.........

03-02-2014, 10:03 PM	#3
RPM Senior Member Join Date: May 2010 Posts: 410	Re: walker Iowa Lowell passed away last July. His youngest son Bill is a friend and has a shop nearby. His shop # is 319 224 3731. Tell him Woodroe sent you. Also, many of Lowell's rebuilds were done by Ron Tegee of Cedar Rapids. I have a couple of his engines fresh on the stands. He is now retired but Bill should have the#. RPM

03-03-2014, 08:04 AM	#4
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 1,987	Re: walker Iowa Thanks so much guys. Sorry to hear about Lowells passing.I will try to get in touch with his son but not holding much hope on finding out what is in this engine. The fellow I bought the car from is also the son of the man that owned this engine & car. Sure has a strong sound & starts right up altho @ present I'm chasing excessive fuel consumption but will get it figured out. Thanks again fellows. B-O-B

03-03-2014, 08:31 AM	#5
john worden Senior Member Join Date: Jun 2011 Location: central Iowa Posts: 484	Re: walker Iowa Sponsored Links (Register now to hide all advertisements) Sorry to hear that Lowell has passed on. He was an excellent source of information and parts. John __________________ Louvering, bias ply tire-truing, metal shaping and forming, lathe and mill work, member shop HAGERTY Ins. expert repair network. High quality paint work in Iowa.