|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-21-2010, 10:50 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 832
|
1935-1947 Ford Pickup Parts
City:
Los Molinos
State:
Ca.
Price:
$250
I have early 1935 through 1947 Ford 1/2 ton pickup parts available, I recently acquired most of two 1/2 ton pickup cabs, one chopped off top 1936 and one stock 1937 and have a lot more parts available, from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email [email protected] or call 530-384-1651
Last edited by Aircooled1; 10-06-2016 at 12:08 AM. |
05-21-2010, 12:45 PM | #2 |
Junior Member
Join Date: May 2010
Location: South Sound, Washington
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
Hey Aircooled, looking for a 1937 Ford 1/2 ton truck grill..
|
Sponsored Links (Register now to hide all advertisements) |
|
05-21-2010, 04:47 PM | #3 |
Junior Member
Join Date: May 2010
Posts: 16
|
Re: 1935-1941 Ford Pickup Parts
I'm looking for a 35-36 glove box door.
|
05-23-2010, 09:08 AM | #4 |
Junior Member
Join Date: May 2010
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
I am looking for a 1940-41 1/2 ton pickup hood and 2 fenders in good condition.
|
06-08-2010, 11:56 PM | #5 |
Junior Member
Join Date: May 2010
Posts: 25
|
Re: 1935-1941 Ford Pickup Parts
I need a 35-37 pickup right front fender brace (the large one). Please advise. Thanks, Rob in WA State
|
06-09-2010, 07:54 AM | #6 |
Member
Join Date: May 2010
Posts: 44
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
|
06-17-2010, 02:10 AM | #7 |
Junior Member
Join Date: May 2010
Location: Parkhill,Ok (lLake Tenkiller)
Posts: 23
|
Re: 1935-1941 Ford Pickup Parts
need passenger side front fender for 40 ford pick up
|
07-07-2010, 06:54 PM | #8 |
Member
Join Date: May 2010
Location: Sequim
Posts: 64
|
Re: 1935-1941 Ford Pickup Parts
Is this Jim? I am looking for 35-36 truck grill trim?
|
07-14-2010, 06:53 PM | #9 |
Senior Member
Join Date: May 2010
Location: PLYMOUTH MASS
Posts: 860
|
Re: 1935-1941 Ford Pickup Parts
HI Jim still looking for a very nice steering wheel and column drop for a 39 pic-up thanks mike p
|
07-21-2010, 02:52 PM | #10 |
Senior Member
Join Date: May 2010
Location: Orlando
Posts: 149
|
Re: 1935-1941 Ford Pickup Parts
Sent you a Email about backing plates.
|
09-20-2010, 07:52 PM | #11 |
Junior Member
Join Date: Sep 2010
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
I will be removing my steering wheel out of my 38 ford pu if interested in wheel and column drop with key let me know, I will be doing this starting in Nov., I have to figure out what cost to ask. Jerry
|
09-20-2010, 11:36 PM | #12 |
Junior Member
Join Date: May 2010
Posts: 24
|
Re: 1935-1941 Ford Pickup Parts
Need front fender brackets for a '37- the large ones that the headlights mount on...
|
09-27-2010, 09:03 PM | #13 |
Member
Join Date: May 2010
Location: Grand Island, Nebraska
Posts: 62
|
Re: 1935-1941 Ford Pickup Parts
You sent pics of one cab but no price. I notice that the price listed on one web site is 650 and on another it is 550.00 What are the prices on your other 35,36 cabs?
|
09-27-2010, 09:04 PM | #14 |
Member
Join Date: May 2010
Location: Grand Island, Nebraska
Posts: 62
|
Re: 1935-1941 Ford Pickup Parts
my email is [email protected]
|
09-28-2010, 09:36 AM | #15 |
Senior Member
Join Date: May 2010
Posts: 260
|
Re: 1935-1941 Ford Pickup Parts
I COULD USE A TITLE FOR ONE . PLEASE EMAIL [email protected]
|
09-28-2010, 11:10 AM | #16 |
Junior Member
Join Date: Sep 2010
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
hi looking for 1937 pickup grill i am calling from mass. my number is 19786675343
or my e-mail is [email protected]. thank you Jim |
10-05-2010, 06:38 PM | #17 |
Member
Join Date: May 2010
Posts: 45
|
Re: 1935-1941 Ford Pickup Parts
Am looking for a 41 Ford 1/2 ton pickup grille. Do you have one, and whats the overall condition and price? Email me at............... [email protected]
|
10-22-2010, 11:55 PM | #18 |
Junior Member
Join Date: Oct 2010
Location: Hamilton, New Zealand
Posts: 20
|
Re: 1935-1941 Ford Pickup Parts
Hi. I'm looking for a pair of good or workable 36 rear p/u fenders plus a good deck. C
|
10-25-2010, 11:10 AM | #19 |
Senior Member
Join Date: May 2010
Location: alto, tx
Posts: 146
|
Re: 1935-1941 Ford Pickup Parts
Do you have a hood pull for a 41 truck? The little handle you pull to open the hood. My email is [email protected] Thanks
|
11-01-2010, 01:04 PM | #20 |
Junior Member
|
Re: 1935-1941 Ford Pickup Parts
Hi....... Im looking for a 35 Ford pk up inner grill shell, It has two crank holes pressed into it .
Last edited by Bri35Ford; 12-15-2010 at 07:05 PM. |
11-03-2010, 04:48 PM | #21 |
Junior Member
Join Date: May 2010
Posts: 24
|
Re: 1935-1941 Ford Pickup Parts
Price on right rear fender for a '35-'37?
|
11-25-2010, 09:27 PM | #22 |
Member
Join Date: Sep 2010
Location: San Diego
Posts: 92
|
Re: 1935-1941 Ford Pickup Parts
I'm looking for the two oval shape doors(?) above the windshield guess they cover the hinge for the windshield.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-26-2010, 08:05 PM | #23 |
Junior Member
Join Date: Nov 2010
Location: Montana
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
I have a 1937 Ford 1.5 ton that has a 1936 radiator shell, grill and hood and I would like to find a 1937 setup.
|
11-27-2010, 10:42 PM | #24 |
Senior Member
Join Date: Jul 2010
Location: Denver, CO
Posts: 317
|
Re: 1935-1941 Ford Pickup Parts
I'm still looking for a '40 thru '46 mast jacket...have one??
|
12-03-2010, 05:00 PM | #25 |
Senior Member
Join Date: May 2010
Location: Waterford, CT
Posts: 250
|
Re: 1935-1941 Ford Pickup Parts
I am looking for a radiator cap for a '41 (11A over G) car(?) radiator.
|
12-04-2010, 08:11 AM | #26 |
Senior Member
Join Date: Aug 2010
Location: Plymouth, Indiana
Posts: 111
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
Jerry: [email protected] |
12-05-2010, 09:28 PM | #27 |
Junior Member
Join Date: Nov 2010
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
i am looking for 6 good 20 inch 1ton bud wheels for my 1937 ford
Thanks Al |
12-09-2010, 01:48 PM | #28 |
Senior Member
Join Date: Aug 2010
Location: Plymouth, Indiana
Posts: 111
|
Re: 1935-1941 Ford Pickup Parts
Looking for a 35 or 36 Ford pickup Fuel Gauge. Thanks, Jerry
|
12-21-2010, 05:32 PM | #29 |
Member
Join Date: Sep 2010
Location: upstate NY
Posts: 50
|
Re: 1935-1941 Ford Pickup Parts
looking for a cowl vent bracket and handle for 41 ford 1/2 ton thanks landshark
|
12-28-2010, 10:05 PM | #30 |
Member
Join Date: May 2010
Location: Dallas
Posts: 62
|
Re: 1935-1941 Ford Pickup Parts
hope to drop in....next time i'm in SAC town...
|
12-31-2010, 12:53 PM | #31 |
Junior Member
Join Date: Dec 2010
Location: Yorktown, Virginia
Posts: 15
|
Re: 1935-1941 Ford Pickup Parts
I am looking for a set of rear fenders for a '41 1/2-ton. If not a pair then definitely a passenger-side one.
|
01-07-2011, 09:42 PM | #32 |
Member
Join Date: May 2010
Location: Tampa,Fl / Moultonborough, NH
Posts: 32
|
Re: 1935-1941 Ford Pickup Parts
Looking for both left and right frame center crossmembers that go between the frame rails and center crossmembers that fit 35-40 passenger or 35-41 pickup frames. Mine is a 39. [email protected] cell 603-848-6688
|
01-08-2011, 11:32 AM | #33 |
Senior Member
Join Date: May 2010
Location: Ham Lake,Minn
Posts: 118
|
Re: 1935-1941 Ford Pickup Parts
What is a good '35 Ford cab with good doors going for ?
|
01-08-2011, 10:37 PM | #34 |
Junior Member
Join Date: Jun 2010
Posts: 11
|
Re: 1935-1941 Ford Pickup Parts
hi, would you happen to have a good used or new window regulator for a 1941 ford drivers door?I got a emergency handle from you a while ago.thanks. [email protected] Jonathan James
|
01-24-2011, 03:13 PM | #35 |
Senior Member
Join Date: Aug 2010
Location: Oregon
Posts: 311
|
Re: 1935-1941 Ford Pickup Parts
Looking for later 40s backing plates for conversion for my 39 coupe. I want to keep my wide 5 drums. Any help? Advice? [email protected]
|
01-28-2011, 07:33 PM | #36 |
Junior Member
Join Date: Oct 2010
Posts: 6
|
Re: 1935-1941 Ford Pickup Parts
Do you have any rear fenders for a 36 Ford pick-up?
|
01-28-2011, 08:29 PM | #37 |
Junior Member
Join Date: Jun 2010
Posts: 11
|
Re: 1935-1941 Ford Pickup Parts
hi,how about a window regulator for a 1941 ford pick up drivers side in good condition? thanks [email protected]
|
01-29-2011, 01:25 PM | #38 |
Senior Member
Join Date: May 2010
Location: Dyer, Indiana
Posts: 129
|
Re: 1935-1941 Ford Pickup Parts
Do you have any 1935 spoked ford weels, they must be crack free. Randy/In
|
01-30-2011, 12:50 PM | #39 |
Junior Member
Join Date: Dec 2010
Location: Oklahoma
Posts: 17
|
Re: 1935-1941 Ford Pickup Parts
Sent you a pm...how about good doors for a 40 pickup?
|
02-01-2011, 09:58 AM | #40 |
Junior Member
Join Date: Dec 2010
Location: Oklahoma
Posts: 17
|
Re: 1935-1941 Ford Pickup Parts
I guess this guy just knows how to bump , but not answer any requests?????
|
02-01-2011, 10:26 AM | #41 |
BANNED
Join Date: May 2010
Location: stratford,ct
Posts: 5,971
|
Re: 1935-1941 Ford Pickup Parts
Why some people have to bump,bump,bump constantly is beond me. Once should be enough.?????????????????? ken ct.
|
02-07-2011, 11:29 PM | #42 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
I Answer All PM Messages Sent To Me....... Bump...
Last edited by Aircooled1; 12-04-2014 at 12:03 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
02-08-2011, 05:26 PM | #43 |
Junior Member
Join Date: Feb 2011
Location: Texarkana, Tx
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
I need some door handles, window guts, some dash gauges, glove box, and title. I am building a 1935 pickup rat rod so it can be weathered. My email is [email protected]
__________________
1935 Ford pickup ratrod with 4bt cummins diesel 1987 Buick Grand National |
02-08-2011, 10:11 PM | #44 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,397
|
Re: 1935-1941 Ford Pickup Parts
Looking for 40/48 hydraulic brake internal parts like bolts, cams, levers, etc.
|
02-10-2011, 08:35 PM | #45 |
Junior Member
Join Date: May 2010
Location: Pleasant Hill , Ia.
Posts: 14
|
Re: 1935-1941 Ford Pickup Parts
do you have a good glove box door for a 39 ford pickup ?
|
02-16-2011, 03:32 PM | #46 |
Junior Member
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
thanks DD |
02-22-2011, 09:02 PM | #47 |
Junior Member
Join Date: Feb 2011
Posts: 6
|
Re: 1935-1941 Ford Pickup Parts
looking for a good frame for a 40 ford pickup, was told a 41 sedan frame will work, but do not know. what is different from the 40 to 41 sedan that makes it not workable? if you have a good one what would be your asking price?
thank you dick |
02-23-2011, 09:52 AM | #48 |
Senior Member
Join Date: May 2010
Location: FRANKLIN GEORGIA
Posts: 158
|
Re: 1935-1941 Ford Pickup Parts
o u have any wide wide five wheels off a truck ?
|
03-05-2011, 05:58 PM | #49 |
Junior Member
Join Date: Mar 2011
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
I have 6 great 20" wheels but they are still attatched to a 1941 1.5 ton that I may want to find a home for. I will be putting it up on the swap meet as soon as I figure out how.
|
03-22-2011, 04:07 PM | #50 | |
Junior Member
Join Date: Feb 2011
Location: Texarkana, Tx
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
Quote:
__________________
1935 Ford pickup ratrod with 4bt cummins diesel 1987 Buick Grand National |
|
04-11-2011, 10:24 PM | #51 |
Member
Join Date: Jan 2011
Location: Benton Arkansas
Posts: 31
|
Re: 1935-1941 Ford Pickup Parts
Do you have a inner grill plate for a 1936 truck. Below and behind the grill. A chin plate? Bolts across the frame horns and helps mount both grill and radiator. Dean - benton ar
|
04-16-2011, 10:13 AM | #52 |
Junior Member
Join Date: Mar 2011
Location: Silver Springs, Florida
Posts: 13
|
Re: 1935-1941 Ford Pickup Parts
Hello, I'm looking for that stainless or chrome center strip for the grille of a 1938 Ford Pickup Truck (I have the "V8" emblem that fits on the top of it)
Call anytime 954-699-4247 Thank You, April Last edited by Garrett; 04-20-2011 at 11:30 AM. |
04-16-2011, 06:37 PM | #53 |
Junior Member
Join Date: Mar 2011
Posts: 2
|
Re: 1935-1941 Ford Pickup Parts
How about a hood (top) for a '35
ford pick-up? Shipping to Woodbridge, Va. 22191??? [email protected] |
04-17-2011, 08:43 AM | #54 |
Member
Join Date: Dec 2010
Location: devine texas
Posts: 37
|
Re: 1935-1941 Ford Pickup Parts
looking for 35 pickup inner fenders and splash apron?
|
05-04-2011, 04:53 PM | #55 |
Junior Member
Join Date: Jul 2010
Location: Turlock Calif.
Posts: 8
|
Re: 1935-1941 Ford Pickup Parts
any 38 39 rear fenders or doors yet ?
__________________
www.laserartworld.com |
05-10-2011, 01:41 PM | #56 |
Junior Member
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Do you have a rear driver side 36 truck fender you could cut a lower front patch panel out of about 6" of mine is rusted out.
Thanks DD |
05-17-2011, 07:32 AM | #57 | |
Junior Member
Join Date: Jul 2010
Location: Turlock Calif.
Posts: 8
|
Re: 1935-1941 Ford Pickup Parts
Quote:
I will call today thanks
__________________
www.laserartworld.com |
|
05-20-2011, 10:41 PM | #58 |
Junior Member
Join Date: Apr 2011
Location: centralia,wa
Posts: 4
|
Re: 1935-1941 Ford Pickup Parts
Aircooled
I have a forty pickup and need a frame. mine ie completely rusted through in multiple areas, also looking for both rear fenders, and a colum drop that is complete, mine is broke. please contact at [email protected]. thanks scott |
09-27-2011, 02:53 PM | #59 |
Junior Member
Join Date: May 2010
Posts: 24
|
Re: 1935-1941 Ford Pickup Parts
Looking for '37 inner fender panels and the wiper covers for inside cab...
|
09-27-2011, 07:06 PM | #60 |
Member
Join Date: Jul 2010
Posts: 52
|
Re: 1935-1941 Ford Pickup Parts
What does "bump" mean?
|
10-06-2011, 07:01 AM | #61 |
Member
Join Date: Apr 2011
Location: Michigan
Posts: 32
|
Re: 1935-1941 Ford Pickup Parts
Interest in wheels if you do
|
10-09-2011, 08:21 AM | #62 |
Junior Member
Join Date: May 2010
Posts: 11
|
Re: 1935-1941 Ford Pickup Parts
Looking for 3.54:1 ring and pinion old stock banjo style and grill for 40 ford pickup. Thanks, Max
|
Sponsored Links (Register now to hide all advertisements) |
|
10-10-2011, 12:00 AM | #63 |
Member
Join Date: Oct 2010
Location: pacific north west
Posts: 30
|
Re: 1935-1941 Ford Pickup Parts
40 1/2 ton standard hood ornament, nose piece?
Hinges? Supports? All latch/opening hardware? thanks |
10-10-2011, 12:10 AM | #64 |
Junior Member
Join Date: Oct 2011
Location: Ransom,PA
Posts: 2
|
Re: 1935-1941 Ford Pickup Parts
hello-
I am new to this site but I am looking to try and find a title for a 46 ford that I have. I would settle for any year that is close to it. Thank you |
10-11-2011, 09:02 AM | #65 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 466
|
Re: 1935-1941 Ford Pickup Parts
Hello I just sent you an email, I'm looking for a usable roof for a 35-36 ford pickup. I have a rust free cab that some kids used as a jungle gym and crushed the roof down 3" below the tops of the doors,thanks
|
10-13-2011, 12:12 PM | #66 |
Junior Member
Join Date: Nov 2010
Posts: 2
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
|
11-08-2011, 08:09 PM | #67 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: 1935-1941 Ford Pickup Parts
Hi Aircooled
Any 40 thru 46 column mast jackets ? If so what kind of shape & price. Thanks, Russ |
11-24-2011, 07:50 AM | #68 |
Member
Join Date: Nov 2011
Posts: 37
|
Re: 1935-1941 Ford Pickup Parts
Hi looking for a nice hood and sides for a 1935 ford truck!
|
12-05-2011, 09:41 AM | #69 |
Junior Member
Join Date: Aug 2011
Location: New York
Posts: 16
|
Re: 1935-1941 Ford Pickup Parts
Hey I am looking for a drivers door for my 1 1/2 ton 35, Also need gauges for dash. THis is all new to me, what is the column drop on the steering? I am looking for steering wheel and key assem. as well. Steering wheel seems to be seized up. thanks for your time.
|
01-05-2012, 07:03 AM | #70 |
Junior Member
Join Date: Jan 2012
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
i am about to buy a 1935 ford 1.5 t truck what i only wanna use the chassis , cab and grill to make it in to a ratrod running 351 , 4 speed manual , 9" diff shorten it , lower it possible ? i am locking for a complete right side door for it as it is missing are they hard to get ? i think the cap and grill is the same as in the pickup
|
01-08-2012, 03:16 PM | #71 |
Junior Member
Join Date: Mar 2011
Posts: 5
|
Re: 1935-1941 Ford Pickup Parts
I need both inner fenders and all the fender braces (front and rear) for a '35-'36 Ford pickup. I also need a decent driver's side running board. Email me at [email protected] When would be a good time to call?
|
01-23-2012, 12:15 PM | #72 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Call 530-384-1651 after 10:00AM PST........ Bump...
|
02-05-2012, 10:28 AM | #73 |
Junior Member
Join Date: Feb 2012
Location: Watford City ND
Posts: 5
|
Re: 1935-1941 Ford Pickup Parts
Looking for front Grille
|
02-05-2012, 10:29 AM | #74 |
Junior Member
Join Date: Feb 2012
Location: Watford City ND
Posts: 5
|
Re: 1935-1941 Ford Pickup Parts
Looking for Grille 36 ford pickup
|
03-28-2012, 04:35 PM | #75 |
Junior Member
Join Date: Feb 2012
Posts: 8
|
Re: 1935-1941 Ford Pickup Parts
need clutch brake pedal assembly for 41 ford pickup call phil 401-397-56356
|
03-28-2012, 04:37 PM | #76 |
Junior Member
Join Date: Feb 2012
Posts: 8
|
Re: 1935-1941 Ford Pickup Parts
need clutch brake assembly for41 ford pickup call401-397-5636
|
04-08-2012, 10:33 PM | #77 |
Senior Member
Join Date: Mar 2012
Location: Terre Haute, IN
Posts: 186
|
Re: 1935-1941 Ford Pickup Parts
hey looking for a 39 ford drivers door , do you got one how much . can you send pictures to [email protected] thanks, Aaron
|
04-09-2012, 06:57 PM | #78 |
Senior Member
Join Date: Mar 2012
Location: Terre Haute, IN
Posts: 186
|
Re: 1935-1941 Ford Pickup Parts
do you got a 1939 ford truck title and how much , you can email at [email protected] . thanks Aaron
|
04-09-2012, 08:30 PM | #79 |
Member
Join Date: May 2010
Posts: 45
|
Re: 1935-1941 Ford Pickup Parts
Looking for grill for 41 Ford p.u. half ton. Reply to [email protected]. Thanks
|
04-12-2012, 11:50 AM | #80 |
Junior Member
Join Date: Apr 2012
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
Got any 1936 Pickup doors? How much you asking?
__________________
"Primered in Rust" "Loud Pipes, Save Lifes" "If it's too Loud, You're too Old" |
05-04-2012, 06:38 AM | #81 |
Junior Member
Join Date: Apr 2012
Location: Lexington, SC
Posts: 4
|
Re: 1935-1941 Ford Pickup Parts
Sent you a pm about some stuff.
|
07-21-2012, 03:31 PM | #82 | |
Junior Member
Join Date: Jul 2012
Posts: 2
|
Re: 1935-1941 Ford Pickup Parts
Quote:
I need the following for a 1935 pickup: 1. spare tire mount bracketry 2. metal trim moulding that goes on cab at windshield sides, these are each about a foot long or so. 3. either 3.25 or 3.54 ring and pinion set for stock rear end. must be very good condition, no whiners. |
|
Sponsored Links (Register now to hide all advertisements) |
|
07-26-2012, 01:27 PM | #83 |
Senior Member
Join Date: Nov 2010
Location: Akron, Ohio
Posts: 299
|
Re: 1935-1941 Ford Pickup Parts
I'm looking for a nice pair of wide fives in the 5" width. PM if you have. Thanks,
__________________
Gene |
07-30-2012, 08:34 AM | #84 |
Member
Join Date: Dec 2010
Posts: 31
|
Re: 1935-1941 Ford Pickup Parts
I need a complete glove box door and hinge for 36/36 pickup
Vernon Blackwood 281-923-5000 |
08-18-2012, 05:29 PM | #85 |
Senior Member
Join Date: Jul 2012
Location: England.
Posts: 106
|
Re: 1935-1941 Ford Pickup Parts
Hi, after a 40-41 pickup hood and grill if you could help with either, don't matter about condition...reply to [email protected] thanks
|
08-24-2012, 12:27 AM | #86 |
Junior Member
Join Date: Aug 2012
Location: brisbane australia
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
Would you have any door hinges I need 2 left hand side and 2 right hand side, if so how much and would you USPS them to Brisbane Australia? many thanks kenny |
08-27-2012, 07:22 PM | #87 |
Junior Member
Join Date: Aug 2012
Location: brisbane australia
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
hi there
how much do you want for full set of 36 pickup hinges? and will you post them to brisbane australia? thanks kenny |
08-28-2012, 05:47 PM | #88 |
Junior Member
Join Date: Sep 2010
Posts: 5
|
Re: 1935-1941 Ford Pickup Parts
do you have a set of 35-36 ford front fenders? any condition. thanks
|
08-29-2012, 07:03 PM | #89 |
Senior Member
Join Date: Jul 2011
Location: Deerfield N.H.
Posts: 294
|
Re: 1935-1941 Ford Pickup Parts
need a 37 pu right inner front fender well
|
09-15-2012, 11:34 PM | #90 |
Junior Member
Join Date: Sep 2012
Location: Pilot Mountain,NC
Posts: 7
|
Re: 1935-1941 Ford Pickup Parts
hey Aircooled, I need a pair of steel front fenders & also a pair of steel rear fenders & steel running boards for 35-36 Ford pickup. Have any good ones ? If so, how many pair? My email is [email protected] thanks!
|
09-18-2012, 11:28 AM | #91 |
Member
Join Date: Sep 2012
Location: Boulder, Colorado
Posts: 97
|
Re: 1935-1941 Ford Pickup Parts
Hi! The '36 pickup seems to have a small panel between the rear fender-bed-running boards. I assume these are usually lost or damaged on old trucks but if you have some that are really rough they will work great on the "as is" driver. Thanks and way to go, keepin' the pickups rolling! P.S. I'm also interested in a specific flathead block from early pickups to rebuild. Thanks!
|
09-24-2012, 08:36 PM | #92 |
Junior Member
Join Date: Sep 2012
Posts: 17
|
Re: 1935-1941 Ford Pickup Parts
Any leads on 38-39 one-ton fenders or running boards?
|
10-04-2012, 10:58 AM | #93 |
Junior Member
Join Date: Oct 2012
Location: Stow, OH
Posts: 3
|
Re: 1935-1941 Ford Pickup Parts
looking for 41 pickup frame....
|
11-09-2012, 09:40 AM | #94 |
Junior Member
Join Date: May 2010
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
How about a 37 windshield frame ?
|
11-15-2012, 12:31 AM | #95 |
Junior Member
Join Date: May 2010
Posts: 4
|
Re: 1935-1941 Ford Pickup Parts
In need of the upper and lower radiator splash pan. Let me know if you have one.
|
11-15-2012, 12:33 AM | #96 |
Junior Member
Join Date: May 2010
Posts: 4
|
Re: 1935-1941 Ford Pickup Parts
In need of the upper and lower radiator splash pan. Let me know if you have one. Forgot to add for a 37 pickup
|
11-25-2012, 08:13 AM | #97 |
Senior Member
Join Date: Dec 2011
Location: Houston Texas
Posts: 170
|
Re: 1935-1941 Ford Pickup Parts
Looking for 35-36 pickup truck column drop complete with key 713-826-2582 Tim
|
12-01-2012, 06:39 PM | #98 |
Junior Member
Join Date: Jun 2012
Location: South Dakota
Posts: 27
|
Re: 1935-1941 Ford Pickup Parts
I have a rare 41 ford pickup radiator from the n series flat head 4 cylinder if your interested or have people looking for one
Jeff [email protected] |
12-11-2012, 09:17 PM | #99 |
Junior Member
Join Date: Nov 2010
Posts: 4
|
Re: 1935-1941 Ford Pickup Parts
sent you an email about a grille.
|
12-25-2012, 11:06 AM | #100 |
Junior Member
Join Date: Feb 2012
Location: Oklahoma
Posts: 19
|
Re: 1935-1941 Ford Pickup Parts
Need front fenders for 35 pickup. Also grill, any front sheet metal.
|
12-25-2012, 10:30 PM | #101 |
Junior Member
Join Date: Dec 2012
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
you wouldnt happen to have any complete 1940-41 trucks would ya? looking for a project, and im also a vw guy, got any vws sitting around?
thanks danny |
12-26-2012, 07:27 PM | #102 |
Junior Member
Join Date: Aug 2011
Location: New York
Posts: 16
|
Re: 1935-1941 Ford Pickup Parts
Hey, do you have any 1935 1 1/2 ton truck parts. Looking for a steering wheel. well the whole column if you had one. Any doors for the cab? thanks
|
Sponsored Links (Register now to hide all advertisements) |
|
12-30-2012, 09:30 PM | #103 |
Junior Member
Join Date: Aug 2010
Posts: 1
|
Re: 1935-1941 Ford Pickup Parts
How much for the 38 p/u grill in the picture? is the center strip on it?
|
01-24-2013, 07:41 PM | #104 | |
Member
Join Date: Dec 2012
Posts: 39
|
Re: 1935-1941 Ford Pickup Parts
Quote:
|
|
01-30-2013, 09:48 PM | #105 |
Member
Join Date: Jan 2013
Location: Millstone township , New Jersey
Posts: 97
|
Re: 1935-1941 Ford Pickup Parts
I am looking for a upper rad / grille support for 1941 ford pick up. 6 cylinder. It would be the part that the hood latches down on.. Tom. 1-732-647-6128
|
02-01-2013, 07:02 PM | #106 |
Senior Member
Join Date: May 2010
Location: East Texas
Posts: 146
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
|
02-05-2013, 11:23 PM | #107 |
Junior Member
Join Date: Jan 2011
Location: Pittsburgh
Posts: 12
|
Re: 1935-1941 Ford Pickup Parts
I'm looking for a pair (or left side) hood hinges for 1938-39 Pick-up
|
02-06-2013, 05:51 PM | #108 |
Senior Member
Join Date: Jun 2010
Location: Murrieta, CA
Posts: 637
|
Re: 1935-1941 Ford Pickup Parts
How about 40 horns?
|
02-10-2013, 08:58 PM | #109 |
Junior Member
Join Date: Jul 2010
Location: Deer Park Texas
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Looking for 38 thru 41 Gas filler tube. Thanks
|
02-21-2013, 07:53 AM | #110 |
Member
Join Date: Feb 2013
Posts: 35
|
Re: 1935-1941 Ford Pickup Parts
Looking for 37 Ford Pickup parts. PM or email me at JLBThreee at gmail dot com
- Grill Trim - Hood Side and Front grill emblem - Right side door mirror - Running board spare tire holder |
03-11-2013, 08:30 PM | #111 |
Member
Join Date: Jul 2010
Posts: 32
|
Re: 1935-1941 Ford Pickup Parts
|
03-13-2013, 08:42 PM | #112 |
Junior Member
Join Date: Feb 2013
Location: ar.
Posts: 23
|
Re: 1935-1941 Ford Pickup Parts
i need a pass side door for my 35 pick up....i don't know early from late..can i get a picture of them?? [email protected]
|
03-16-2013, 10:42 AM | #113 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Bumping to the top of the list is supposed to be allowed every 3 days according to the Ford Barn rules.....check them out yourself.....Jim A.
|
03-22-2013, 03:41 PM | #114 |
Junior Member
Join Date: Mar 2013
Posts: 8
|
Re: 1935-1941 Ford Pickup Parts
If you can help me , i sure do need a pair of 1938-1939 ford pickup hood hinges . these are very hard to find . Thanks
|
05-21-2013, 10:04 AM | #115 |
Junior Member
Join Date: Jul 2011
Posts: 6
|
Re: 1935-1941 Ford Pickup Parts
aircooled, i need the front grill aprons for my 1938 ford truck.. between the grill and fenders. thank you . please notify at [email protected].. Jack
|
05-22-2013, 08:53 PM | #116 |
Senior Member
Join Date: May 2010
Location: Mt. Holly,NJ
Posts: 1,822
|
Re: 1935-1941 Ford Pickup Parts
Looking for 1938 or 39 pickup radiator stamped 81 C. [email protected]
Would like to get a shroud also , but not urgent. |
05-31-2013, 11:26 PM | #117 |
Junior Member
Join Date: May 2013
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Hello I need a 1937 truck grill, rear fenders, a bench seet, a bed and more,, let me know how much for the short list,,,thanks
|
06-06-2013, 12:34 PM | #118 |
Member
Join Date: Jan 2011
Location: Benton Arkansas
Posts: 31
|
Re: 1935-1941 Ford Pickup Parts
Aircooled the grill and the fenders on a 1.5 1937 are larger / bigger radius. Is the cab the same as 1/2 t? Will 1/2 fenders mate to a 1.5 ton? My 1/2t has a despicable crush spot in the B pillar and I have a 1.5. Do u have that 1/2 fender still? I read roothawgs tech post but am unclear on the above
|
06-16-2013, 02:03 PM | #119 |
Member
Join Date: Jun 2013
Location: Enumclaw,wa
Posts: 31
|
Re: 1935-1941 Ford Pickup Parts
Do you have a steering box for a 36 pick up?
|
06-16-2013, 08:01 PM | #120 |
Senior Member
Join Date: May 2010
Location: FRANKLIN GEORGIA
Posts: 158
|
Re: 1935-1941 Ford Pickup Parts
need dual bottom pully for 24 bolt ,38-40 ford big truck
|
06-21-2013, 03:08 PM | #121 |
Junior Member
Join Date: Dec 2010
Location: Yorktown, Virginia
Posts: 15
|
Re: 1935-1941 Ford Pickup Parts
Hi, I need a frame, radiator and possibly a grille for a 1940 truck. If you have them, can you tell me how to go about arranging shipping? Thanks...
|
07-31-2013, 09:52 PM | #122 |
Member
Join Date: Jan 2011
Posts: 38
|
Re: 1935-1941 Ford Pickup Parts
Looking for 40 or 41 pickup hood and set of front fenders
|
Sponsored Links (Register now to hide all advertisements) |
|
08-14-2013, 10:22 AM | #123 |
Junior Member
Join Date: Aug 2011
Location: Veazie, Maine
Posts: 29
|
Re: 1935-1941 Ford Pickup Parts
I am looking for 1936 pickup inner fenders
I believe that 35,36,37 are all similar |
09-06-2013, 10:44 AM | #124 |
Member
Join Date: Feb 2013
Posts: 45
|
Re: 1935-1941 Ford Pickup Parts
looking for 41 hood moldings both sides along the hood release handle.
thanks steve [email protected] |
09-06-2013, 02:08 PM | #125 |
Junior Member
Join Date: Aug 2013
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Hi looking for dash speedo 0-60 mph and gauges , steering wheel with center horn button, seat and passenger side windshield garnish I have a 1942 1 & 1/2 ton flatbed
Thanks Bob |
09-27-2013, 10:45 PM | #126 |
Junior Member
Join Date: Oct 2011
Location: Cañon City, CO
Posts: 19
|
Re: 1935-1941 Ford Pickup Parts
Sponsored Links (Register now to hide all advertisements)
|
11-30-2013, 08:04 PM | #127 |
Junior Member
Join Date: Jul 2010
Location: Catskill MTS NY
Posts: 26
|
Re: 1935-1941 Ford Pickup Parts
have front fenders hood and grill for 38 39 pickup 518 821 7123 Bill in good shape
|
12-01-2013, 12:19 AM | #128 |
Junior Member
Join Date: Dec 2013
Posts: 10
|
Re: 1935-1941 Ford Pickup Parts
Need tailgate and box sides for '40.
Front/rear bumper mounts for '40. Glass for '40. |
12-31-2013, 08:31 PM | #129 |
Junior Member
Join Date: Dec 2013
Posts: 2
|
Re: 1935-1941 Ford Pickup Parts
do u have 1940 ford pickup boxes in good condition
|
02-02-2015, 05:10 PM | #130 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Have only a few Old Ford truck parts left for sale..... Bump...
Last edited by Aircooled1; 01-17-2016 at 10:54 AM. Reason: New pictures |
01-24-2017, 02:23 PM | #131 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Still have 'em ..... Bump...
|
07-05-2017, 12:07 PM | #132 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Have only a few Old Ford truck parts left for sale..... Bump...
|
10-15-2017, 10:51 AM | #133 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Still Have only a few Old Ford truck parts left for sale..... Bump...
|
06-26-2018, 08:25 AM | #134 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Still Have only a few Old Ford truck parts left for sale..... Bump...
|
12-03-2018, 01:39 PM | #135 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: 1935-1941 Ford Pickup Parts
Still Have only a few Old Ford truck parts left for sale..... Bump...
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|