|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-23-2013, 09:56 PM | #1 |
Senior Member
Join Date: May 2010
Location: Chicago
Posts: 153
|
V8-60 Gasket source
Hi all,
Can anyone recommend a good source for a V8-60 Gasket kit? I was able to find a full kit (with head gaskets) from Marx parts for about $160, but wanted to see if there were any other options before I place the order. I've also never ordered from Marx before, so if anyone has any experience with them please let me know if they're a good vendor. Thanks for any input. Nick |
02-23-2013, 10:09 PM | #2 |
Senior Member
Join Date: May 2010
Location: Waxahachie, Texas
Posts: 241
|
Re: V8-60 Gasket source
Mac 's has full sets with FelPro head gaskets for $130 and head gaskets for $104 per pair. www.macsautoparts.com
Joblot has full sets for $159, timing cover for $6.95 and some others. They use Ford parts numbers and I called and asked about a number they didn't list but they had it. They have water pump kits too. www.joblotauto.com |
Sponsored Links (Register now to hide all advertisements) |
|
02-23-2013, 10:17 PM | #3 |
Member
Join Date: May 2012
Location: Wadsworth, Ohio
Posts: 36
|
Re: V8-60 Gasket source
Go to bestgasket.com, click on Products Search, click on Ford Mercury under engine gaskets, click on V8 flathead and finally, 1937-40 V8 60 for lists of all 17 stud gaskets.
|
02-24-2013, 03:39 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: V8-60 Gasket source
I've dealt with Marx. Very upstanding guy.
|
02-24-2013, 05:58 PM | #5 |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,471
|
Re: V8-60 Gasket source
Sponsored Links (Register now to hide all advertisements)
__________________
www.fordcollector.com |
|
|
Sponsored Links (Register now to hide all advertisements) |
|