|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-18-2012, 08:57 PM | #1 |
Member
Join Date: Apr 2012
Location: Gilroy,CA
Posts: 31
|
ID'ing wheels...longshot?
The wheels came and went on a car I got rid of years ago,but have a chance to get them back. I know they are not "newer",and are narrow. From the pic,any guestimates? I'm just contemplating spokes on my roadster,or steelies.... Either way,i'm getting them. Thanks.
|
04-18-2012, 09:16 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: ID'ing wheels...longshot?
They look a lot like the wheels my stock 46 had---they were 16", I think they were made in 15" also ---Mercury??
|
Sponsored Links (Register now to hide all advertisements) |
|
04-18-2012, 09:24 PM | #3 |
BANNED
Join Date: Dec 2010
Posts: 956
|
Re: ID'ing wheels...longshot?
I believe Fords from 40-48 used the same style rim. I've got a few of these myself I use as garage rollers.
|
04-18-2012, 09:47 PM | #4 |
Member
Join Date: Aug 2010
Location: Portland, Or
Posts: 50
|
Re: ID'ing wheels...longshot?
x2 on the 16" for '40 to '48. Prior years were wide fives. I think your right about the 15" Mercs, but if I remember right it was '48 only.
Norm |
04-18-2012, 10:34 PM | #5 |
Member
Join Date: Apr 2012
Location: Gilroy,CA
Posts: 31
|
Re: ID'ing wheels...longshot?
I'm picking these up tommorow. Been in touch with the current owner,and they were swapped for something else. He still had them sitting. The concensus between the both of us remembering that they were in fact 16''s. Any width(s) these could be,or standard sizes? Thanks.-Kid
|
04-19-2012, 07:22 AM | #6 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: ID'ing wheels...longshot?
Sponsored Links (Register now to hide all advertisements)
Paul in CT |
04-19-2012, 08:40 AM | #7 |
Senior Member
Join Date: Jun 2010
Location: Owosso, MI
Posts: 673
|
Re: ID'ing wheels...longshot?
The basic design look like Kelsey Hayes wheels that were used on many Willys vehicles.
__________________
1929 Model A Barn find. California car, just a few more parts to find. Interior, steering box (rebuild), and I am sure much more! |
04-19-2012, 11:10 AM | #8 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: ID'ing wheels...longshot?
I think that the wheels are 1940-48 Ford 16 inch. The 1949-51 Mercury 15 inch wheels had the nobs for the hubcaps to snap on the outside
|
04-19-2012, 11:19 AM | #9 |
Senior Member
Join Date: Jan 2012
Location: Tx
Posts: 502
|
Re: ID'ing wheels...longshot?
late 40's ford passenger cars will also swap with dodge and Plymouth cars of the late 40's early 50's
|
04-19-2012, 01:35 PM | #10 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: ID'ing wheels...longshot?
1940 thru 48 wheels will fit the model A lug pattern. 1949 and later Ford wheels will fit the old Mopars but not the model A. Full size ford pickups have the same lug pattern as the model A. 1949 through at least 51 Mercury 15 inch wheels also have the same lug pattern as the model A.
|
04-19-2012, 03:02 PM | #11 |
Senior Member
Join Date: Sep 2010
Posts: 492
|
Re: ID'ing wheels...longshot?
Those look exactly like the set I have in the shop. They were on a post-war Merc. They were also identical to the wheels that were on a 41 Continental, as they were once used as rollers for that project. There may be a wider version for Merc and Lincolns, but nothing I can raise my right hand to.
|
04-19-2012, 07:03 PM | #12 |
Member
Join Date: Apr 2012
Location: Gilroy,CA
Posts: 31
|
Re: ID'ing wheels...longshot?
Well... The wheels are now in my posession.Freebie no less.. They are infact 16's as speculated.All the BS (back space)is the same,so that's a good thing.
Another Q though,which doesn't matter for my deal but curious anyways...... three of the wheels have this "hole"-about a 1/4 inch drilled into them,and one does not. I'm just guessing a difference in year kinda thing.Here's a couple of pics.... thanks for the responses.-Kid |
04-20-2012, 11:37 PM | #13 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: ID'ing wheels...longshot?
Didn't chrysler products use a locating pin on the drum and the wheel bolted to the drum, fords and chevy's had studs on the drums and used nuts to tighten?
Paul in CT |
04-21-2012, 12:27 PM | #14 |
Senior Member
Join Date: May 2010
Location: La Verne, Ca.
Posts: 827
|
Re: ID'ing wheels...longshot?
Much bigger pin on the Chrysler Corp cars and as I recall in line with the studs or bolts, depending.
|
04-21-2012, 01:13 PM | #15 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: ID'ing wheels...longshot?
The mopars did use a locating pin. It was fairly easy to remove the pin with a cold chisel and a hammer. I have removed a few locating pins when I needed to use 1949 and up Ford car wheels on a Plymouth or Dodge car.
|
04-22-2012, 06:57 PM | #16 |
Member
Join Date: Apr 2012
Location: Gilroy,CA
Posts: 31
|
Re: ID'ing wheels...longshot?
Update.... The wheel without the locating pin hole turned out to be a 4 1/2.. I went to a swap today at All Ford in Campbell CA that usually has a good representation of early iron/parts. From my understanding from vendors who had wheels,the 5' wide is pretty rare. Not saying they are not out there,just none were present at the swap. I ended up buying two 4' wheels for $40.
So,with the info I got today,at least I learned the locating hole(dowell) does infact come on a 5' wheel,to where as a 4 1/2,and a 4',does not.Guys-these are FORD wheels. Just a reference for those who are looking! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|