|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-30-2016, 04:31 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
plug wires for a 59L with a crab
What 7 MM plug wires are recommended for the 59L with a crab distributor. Looking for a good source for right angle terminals at both the plugs and cap. Thank you Fordbrainers.
|
05-31-2016, 07:57 AM | #2 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,185
|
Re: plug wires for a 59L with a crab
I used pertronix 7mm spiral core wires. I have not run them but they went on the engine nice. Crab distributor.
Thread http://fordbarn.com/forum/showthread.php?t=162854 John Last edited by john in illinois; 05-31-2016 at 08:09 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
05-31-2016, 09:08 AM | #3 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: plug wires for a 59L with a crab
I use the Speedway motors Moroso set for a flathead , good quality kit....
|
05-31-2016, 10:09 AM | #4 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: plug wires for a 59L with a crab
I've always made my own using Packard 440 wire
|
05-31-2016, 02:23 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: plug wires for a 59L with a crab
Thank you all for your responses. If I can find a source for the Packard 440 wire, where would I find good quality right angle ends for the cap & plugs ?
|
05-31-2016, 02:33 PM | #6 | |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,324
|
Re: plug wires for a 59L with a crab
Sponsored Links (Register now to hide all advertisements)
Quote:
https://www.brillman.com/ |
|
05-31-2016, 02:43 PM | #7 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: plug wires for a 59L with a crab
Best supplier on the planet:
https://www.brillman.com/ Just saw tub agrees! They have 440 and every variety of plain and vintage wire, Rajah terminals galore, and every known type of OEM terminal and boot. And plan out how you're going to manage the crossover wires with '42 type cap! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|