The Ford Barn

BobM · 02-05-2012, 03:36 AM

Am using 4 speed toploader with my flathead; will the 10" X 1 1/16" Mustang clutch disc be compatible with my early 10" Ford long style pressure plate and throwout bearing?

JWL · 02-05-2012, 07:51 AM

Yes, that combination works great.

miss victoria · 02-05-2012, 10:32 AM

Some discs are thinner stock .352 some mustang .312 and need between .010-.015 shims under the 3 finger blocks.

BobM · 02-05-2012, 11:18 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by miss victoria

Some discs are thinner stock .352 some mustang .312 and need between .010-.015 shims under the 3 finger blocks.

Thanks for responding; if I find Mustang clutch disc too thin what do I use for shim material under p/p arms? Bob

02-05-2012, 03:36 AM	#1
BobM Senior Member Join Date: May 2010 Location: Las Vegas, NV Posts: 213	Ford 4 speed toploader to 8BA flathead Am using 4 speed toploader with my flathead; will the 10" X 1 1/16" Mustang clutch disc be compatible with my early 10" Ford long style pressure plate and throwout bearing?

02-05-2012, 07:51 AM	#2
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: Ford 4 speed toploader to 8BA flathead Yes, that combination works great.

02-05-2012, 10:32 AM	#3
miss victoria Senior Member Join Date: Oct 2011 Posts: 310	Re: Ford 4 speed toploader to 8BA flathead Some discs are thinner stock .352 some mustang .312 and need between .010-.015 shims under the 3 finger blocks.