Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-04-2014, 10:13 PM   #1
ford3
Senior Member
 
Join Date: Oct 2012
Location: oroville calif.
Posts: 1,453
Default Re: 1936 Ford Pickup - New Fuel Pump, No Gas

put a jet nozzle in the filler neck and sealed with a rag, squirt a little air pressure in the tank while a friend turns the engine over, some pumps just wont pick up fuel when new, be careful with the air it only takes a couple of pounds to force fuel to the pump and carb, and doing this you can look under the car to see if you have any leaks, if there are any you will be able to see the drips or wet spots on the fuel line
ford3 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:04 PM.