The Ford Barn

gearhead1952 · 02-12-2015, 07:25 PM

Sponsored Links (Register now to hide all advertisements)

This is an Autolite 4100 carb in good shape that I took off a 1966 289 A code motor. Ran fine just too big a carb for the A code motor. Has the 1.12 venturi which is 600cfm. Was rebuilt with a kit from Mike's Carbs including new floats and idle mixture screws. Carb was very clean inside and did not need a rebuild. I will give you all the old parts removed. Has Pri Vent #1 / Sec Vent #6 / Pri Jet 65 / Sec Jet 53
The one pic shows the area where there should be numbers stamped to indicate application but there is only the letter P which makes no sense. From my research I believe this to be from 1963 or 1964. The tag was missing from the top when I got it.
Price is $225 plus shipping.

02-12-2015, 07:25 PM	#1
gearhead1952 Senior Member Join Date: May 2010 Location: Julesburg, Colorado Posts: 714	Autolite 4100 Carb 4BBL 1.12 City: Arvada State: CO Price: 225 Sponsored Links (Register now to hide all advertisements) This is an Autolite 4100 carb in good shape that I took off a 1966 289 A code motor. Ran fine just too big a carb for the A code motor. Has the 1.12 venturi which is 600cfm. Was rebuilt with a kit from Mike's Carbs including new floats and idle mixture screws. Carb was very clean inside and did not need a rebuild. I will give you all the old parts removed. Has Pri Vent #1 / Sec Vent #6 / Pri Jet 65 / Sec Jet 53 The one pic shows the area where there should be numbers stamped to indicate application but there is only the letter P which makes no sense. From my research I believe this to be from 1963 or 1964. The tag was missing from the top when I got it. Price is $225 plus shipping.