The Ford Barn

woodiewagon46 · 11-27-2015, 07:50 PM

Exactly what I told you in post #14. Get a copy of the article and it explains everything.

flathead_jr · 11-28-2015, 03:42 PM

I'm located in Idaho Falls, Idaho.

McKay59AB · 11-28-2015, 04:33 PM

Dennis Carpenter has them listed in his catalog, online version too. Part number 91A-6055. A tad on the pricey side.

Binx · 11-28-2015, 09:45 PM

I see Dennis Carpenter's sleeves are $40.00. I know locally I can have one cylinder bored, honed and piston fitted for 40.00. BUT I know my block will never be original again.......I say go with the sleeves!

Lonnie

Mark's 37 · 11-28-2015, 11:25 PM

I saw this on Carpenter's online catalog:

http://dennis-carpenter.com/cylinder...ve/p/78C-6055/

Whoops...not the thin wall sleeve.

flathead_jr · 12-04-2015, 05:06 PM

Sponsored Links (Register now to hide all advertisements)

I did see them listed on Dennis Carpenter's site for $40, I may still see if I can find one locally though, this stuff shows up around here all the time.

11-27-2015, 07:50 PM	#21
woodiewagon46 Senior Member Join Date: Jun 2012 Location: Long Island,NY Posts: 1,555	Re: Finding and installing a thin wall sleeve for 37 Ford Exactly what I told you in post #14. Get a copy of the article and it explains everything.

11-28-2015, 03:42 PM	#22
flathead_jr Member Join Date: Jan 2012 Location: Idaho Falls, Id Posts: 65	Re: Finding and installing a thin wall sleeve for 37 Ford I'm located in Idaho Falls, Idaho.

11-28-2015, 04:33 PM	#23
McKay59AB Member Join Date: Apr 2011 Location: Chelan,Wa. Posts: 62	Re: Finding and installing a thin wall sleeve for 37 Ford Dennis Carpenter has them listed in his catalog, online version too. Part number 91A-6055. A tad on the pricey side.

11-28-2015, 09:45 PM	#24
Binx Senior Member Join Date: Oct 2011 Location: Gloucester VA Posts: 1,042	Re: Finding and installing a thin wall sleeve for 37 Ford I see Dennis Carpenter's sleeves are $40.00. I know locally I can have one cylinder bored, honed and piston fitted for 40.00. BUT I know my block will never be original again.......I say go with the sleeves! Lonnie

11-28-2015, 11:25 PM	#25
Mark's 37 Senior Member Join Date: Jul 2015 Location: Aptos, Ca Posts: 355	Re: Finding and installing a thin wall sleeve for 37 Ford I saw this on Carpenter's online catalog: http://dennis-carpenter.com/cylinder...ve/p/78C-6055/ Whoops...not the thin wall sleeve.

12-04-2015, 05:06 PM	#26
flathead_jr Member Join Date: Jan 2012 Location: Idaho Falls, Id Posts: 65	Re: Finding and installing a thin wall sleeve for 37 Ford Sponsored Links (Register now to hide all advertisements) I did see them listed on Dennis Carpenter's site for $40, I may still see if I can find one locally though, this stuff shows up around here all the time.