|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-08-2011, 06:49 PM | #1 |
Junior Member
Join Date: Jun 2010
Location: Southern MN
Posts: 28
|
1952 Mercury steering column help
The steering shaft on my merc moves around and so I took the wheel off and found this.
It slides over the shaft and presses into a bearing in the column. I had the wheel off once before and tapped it in place with a 3/4" piece of copper pipe, but after a month it popped back out. Here is a few pictures of the column where the piece goes. I checked macs and I can't find this little spacer. How is it supposed to be put in place? Any help on if something is missing or what I need to do to get this fixed would be appreciated. |
04-08-2011, 08:18 PM | #2 |
Junior Member
Join Date: Jun 2010
Location: Southern MN
Posts: 28
|
Re: 1952 Mercury steering column help
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|