The Ford Barn

Dan1234 · 01-18-2016, 01:02 AM

So I have a 31 Ford Model A that I'm trying to put the visor back on. So the question is ..do the tabs go under or over the end of the curve roof panel.

Mitch//pa · 01-18-2016, 06:31 AM

Neither it butts up against without going under or over...it must lay flat perpendicular to the curved roofed panels (interlocking) or you will have a lump under the roof covering.
The panel ends get nailed down

Dan1234 · 01-18-2016, 03:40 PM

Sponsored Links (Register now to hide all advertisements)

Mitch, thanks

01-18-2016, 01:02 AM	#1
Dan1234 Member Join Date: Oct 2014 Location: Port Angeles, WA Posts: 48	visor placement So I have a 31 Ford Model A that I'm trying to put the visor back on. So the question is ..do the tabs go under or over the end of the curve roof panel.

01-18-2016, 06:31 AM	#2
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: visor placement Neither it butts up against without going under or over...it must lay flat perpendicular to the curved roofed panels (interlocking) or you will have a lump under the roof covering. The panel ends get nailed down Last edited by Mitch//pa; 01-18-2016 at 07:49 AM.

01-18-2016, 03:40 PM	#3
Dan1234 Member Join Date: Oct 2014 Location: Port Angeles, WA Posts: 48	Re: visor placement Sponsored Links (Register now to hide all advertisements) Mitch, thanks