04-08-2015, 06:15 PM | #1 |
Senior Member
Join Date: May 2010
Location: westbury ny
Posts: 854
|
brake drums
I m looking to change my 6 cyl ranchero to 5 lug by drilling rear axle to 5 stud it has 2 1/2 inch brakes and the inner measurement is 9 inchs all drums I see are listed as 10 inchs is this the total width from outside edge too edge or inner also anyone know where I should look or am I going to have to change the backing plates. found that the aerostar has 9 inch as well as the mazda pickup although they run 1 3/4 shoes so I answered my own ? 's thanks
Last edited by frank long island; 04-08-2015 at 09:49 PM. Reason: added info |
04-09-2015, 01:14 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mansfield, Ohio
Posts: 409
|
Re: brake drums
How about early V8 Mustang?
|
Sponsored Links (Register now to hide all advertisements) |
|
04-09-2015, 01:50 PM | #3 |
Senior Member
Join Date: Sep 2014
Posts: 160
|
Re: brake drums
The measurments given, like 10 inches, is for the inside.
|
04-11-2015, 04:10 PM | #4 |
Senior Member
Join Date: Sep 2011
Location: Black Hills, SD
Posts: 577
|
Re: brake drums
What year is it? I have a 64 V8 Fairlane and there is an extra pair of axles in the back seat.
|
04-11-2015, 05:09 PM | #5 |
Senior Member
Join Date: May 2010
Location: westbury ny
Posts: 854
|
Re: brake drums
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|