|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-24-2014, 07:35 PM | #1 |
Senior Member
Join Date: Apr 2013
Location: Shepherdstown, WV
Posts: 133
|
36 speedo glass supplier??
Does anyone sell new glass fronts for the 35-36 speedo?
Got a mint speedometer but the glass has a couple of fine scratches. |
11-24-2014, 08:29 PM | #2 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: 36 speedo glass supplier??
Try buffing them out with toothpaste or polishing compound.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-24-2014, 09:57 PM | #3 |
Senior Member
Join Date: Sep 2014
Location: oroville calif
Posts: 893
|
Re: 36 speedo glass supplier??
take yours to a glass shop, one who installs window glass, they can cut you one
|
11-24-2014, 10:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
|
Re: 36 speedo glass supplier??
Convex lens... not quite as easy as having a piece of glass cut
|
11-25-2014, 02:40 AM | #5 |
Senior Member
Join Date: May 2010
Location: tasmania
Posts: 221
|
Re: 36 speedo glass supplier??
use one from a early 60s bug and don't tell anyone
|
11-25-2014, 03:32 AM | #6 |
Senior Member
Join Date: May 2010
Location: West Michigan
Posts: 1,218
|
Re: 36 speedo glass supplier??
Sponsored Links (Register now to hide all advertisements)
Tom |
11-25-2014, 06:32 AM | #7 |
Senior Member
Join Date: Apr 2013
Location: Shepherdstown, WV
Posts: 133
|
Re: 36 speedo glass supplier??
Thanks a lot guys, all input appreciated.
Had the speedometer itself rebuilt but despite them polishing the glass two light scratches remain and the OCD part of me cant let it go! I have a spare with a few comparable scratches I will try the toothpaste trick on. I just had hoped a supplier had started selling them. |
11-25-2014, 08:17 AM | #8 |
Senior Member
Join Date: Jun 2011
Location: Oregon
Posts: 315
|
Re: 36 speedo glass supplier??
You might try clock face glass they make lots of sizes.
http://www.ronellclock.com/Convex-Glass_c62.htm Bill
__________________
The best way to have a friend is to be a friend. Howdy Doody |
11-25-2014, 09:07 AM | #9 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: 36 speedo glass supplier??
|
11-25-2014, 09:57 AM | #10 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: 36 speedo glass supplier??
36Bill, thanks for the link. Lots of neat stuff to fix clocks and glass for gauges.
|
11-25-2014, 10:03 AM | #11 | |
Senior Member
Join Date: Apr 2013
Location: Shepherdstown, WV
Posts: 133
|
Re: 36 speedo glass supplier??
Quote:
Measured another glass I have at between 4 1/4 and 4 5/16 so ordered both, only @$3 each. I will post back with results once they are here. |
|
11-25-2014, 02:32 PM | #12 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: 36 speedo glass supplier??
Try Bob's Speedometer. 800/592-9673
|
01-29-2015, 11:08 AM | #13 |
Senior Member
Join Date: Apr 2013
Location: Shepherdstown, WV
Posts: 133
|
Re: 36 speedo glass supplier??
Thought I would return here to close off on this thread.
The gauges were in fact rebuilt at Bob's speedometer but they were unable to do anything in relation to improving the glass. I found a company called Carters Clock Glass who hand made a brand new glass. Highly recommend them. http://www.cartersclockglass.com/ Just send them the bezel and if you have it the old glass. It was like $40. Also, I bought the convex glasses above in this thread but they were no good. SUPER thin, very different curvature although diameter was correct. Last edited by wex65; 01-29-2015 at 11:20 AM. |
01-29-2015, 02:31 PM | #14 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
|
Re: 36 speedo glass supplier??
Might note that there were several manufacturers of 36 speedo and the glass does not interchange.
|
02-02-2015, 01:39 PM | #15 |
Senior Member
Join Date: Apr 2013
Location: Shepherdstown, WV
Posts: 133
|
Re: 36 speedo glass supplier??
|
02-02-2015, 01:51 PM | #16 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: 36 speedo glass supplier??
Hi Everyone; wex65, Thanks very much for finishing the thread! People could learn from your thoughtfulness.
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|