|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Guest
Posts: n/a
|
![]() I am putting in a healthy engine in my 54 sled. I am afraid that the stock rear on my 54 2 door sedan will not be able to handle the abuse I plan to put to it. What year 9 inch will work to replace my current rear? <table><tr><td><font face="arial"> |
![]() |
#2 |
Guest
Posts: n/a
|
![]() '57 thru '59 car and Lincoln Versallies (these have rear disc brakes). <table><tr><td><font face="arial"> |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Guest
Posts: n/a
|
![]() Bolt pattern and wheelbase are the same? Just want to make sure to keep it as close as I can for wheel clearence. <table><tr><td><font face="arial"> |
![]() |
#4 |
Guest
Posts: n/a
|
![]() These have the same bolt pattern and are within 1/2" +or- in width. I have a '57-'59 in my '54. <table><tr><td><font face="arial"> |
![]() |
#5 |
Guest
Posts: n/a
|
![]() Thank you very much! <table><tr><td><font face="arial"> |
![]() |
#6 |
Guest
Posts: n/a
|
![]() Sponsored Links (Register now to hide all advertisements)
You can also use 66-70 mustang 9". 1/2 inch wider and need to move spring perches. Have a 69 rear in my 52 Vicky with 429 CJ. <table><tr><td><font face="arial"> |
|
|
Sponsored Links (Register now to hide all advertisements) |
|