Fresh air vent assembly (handle)

[busmania]

This can’t be that complicated but I can’t figure out how it goes back together. It was apart when I got the car. What am I missing? What holes (numbered in photos) go where? No combo of what I try seems to work! Am I missing pieces?

85A4791B-E892-4201-9AFE-92F1574C9B1D.jpg

02CF5F2E-54D4-4710-BB76-0E37630D0111.jpg

75D29BE1-1B33-4210-A6A3-9A399C4952F3.jpg

[Kube]

Does this help?

[busmania]

Yes! My issue was one of the rods was frozen when it needed to move freeley which wouldn’t let the holes line up which is what was confusing me. Thank you.

[19Fordy]

A few more photos that may also help. White stuff is Lubriplate grease.

[Graeme / New Zealand]

Sponsored Links (Register now to hide all advertisements)

It's important you get the levers/arms orientated correctly otherwise the vent will not close down properly. I know because I f'ed this up on the last v8 I owned and redrilled some of the holes to get it to close. On my latest car I saw the error of my ways and assembled this one correctly. I've attached an exploded pic of 41 to 48 vent. the principle is probably the same with yours

GB