The Ford Barn

Ol' Ron · 06-12-2010, 01:11 PM

Well, I have to admit this forum ain't half bad and there are many new friends as well as the old gang. I have trouble posting and have no idea if this will post. I also discovered "Friends" and just recently "PM". I have no idea how to deal with these and believe there must be some directions some where. I can increase the size to the print and I also have a "text to speech" program. I apologize to anyone that I didn't return any messages. Now lets see if this goes.

Ol' Ron · 06-12-2010, 01:14 PM

Now I tried posting this 3 times before it got through. Quick replys are easy.

RandyLPeterson · 06-12-2010, 01:19 PM

Never give up your knowledge here is Highly valued

Randy L Peterson

ken ct · 06-12-2010, 01:22 PM

Your doing OK ,your posts are comming through,hope you can read this as i dont know how to make larger sorry RON. ken ct.

Dennis/Arkansas · 06-12-2010, 01:32 PM

Hey Ken, If you want to make larger size print don't do a "Quick Reply'. Instead go to "Post Reply". On the top row of message box there is a tab for "Sizes" right next to "Fonts" (style of print) Good Luck, Dennis/Arkansas

blown49 · 06-12-2010, 01:48 PM

Sponsored Links (Register now to hide all advertisements)

Ron, PM's are private messages. On the right side of the page, near the top it'll say Welcome Ron. Just below that is a listing for Private Messages: Unread__, Total__ . Click on that to view a private message sent to you by another member. After viewing you can send a message back to the sender.

Hope this helps Ron,
Jim

Ol' Ron · 06-12-2010, 02:36 PM

All right this is good info. I did find the PM by accident.. My next question is kind of stupin, but how do you post a new message?

Ol' Ron · 06-12-2010, 03:50 PM

That's just it, it doesn't go.

Ol' Ron · 06-12-2010, 03:53 PM

I just ran a test and it didn't post.

55 dude · 06-12-2010, 04:41 PM

worked for me!

hey ron you still have your "mobile shoutout"!

Ford46 · 06-12-2010, 04:55 PM

Quote:

Originally Posted by Ol' Ron

I just ran a test and it didn't post.

Ron, actually it did post as a new message. LouB.

Craig CT · 06-12-2010, 05:25 PM

Hi Ron; It's all a process and you keep improving. Alot of the guys here are very helpful. Happy motoring, Craig. PS Did your grandson set up that visor ?

redfor40 · 06-12-2010, 08:15 PM

i got this and the test doing good

blown49 · 06-13-2010, 08:58 AM

Quote:

Originally Posted by Ol' Ron

All right this is good info. I did find the PM by accident.. My next question is kind of stupin, but how do you post a new message?

RON, Top Of Page on left side find Start A New Thread, click on that make your thread title, post and then click submit.

Jim

06-12-2010, 01:11 PM	#1
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,870	Need alittke help Well, I have to admit this forum ain't half bad and there are many new friends as well as the old gang. I have trouble posting and have no idea if this will post. I also discovered "Friends" and just recently "PM". I have no idea how to deal with these and believe there must be some directions some where. I can increase the size to the print and I also have a "text to speech" program. I apologize to anyone that I didn't return any messages. Now lets see if this goes.

06-12-2010, 01:14 PM	#2
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,870	Re: Need alittke help Now I tried posting this 3 times before it got through. Quick replys are easy.

06-12-2010, 01:19 PM	#3
RandyLPeterson Junior Member Join Date: Jun 2010 Location: Flandreau,South Dakota Posts: 22	Re: Need alittke help Never give up your knowledge here is Highly valued Randy L Peterson

06-12-2010, 01:22 PM	#4
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: Need alittke help Your doing OK ,your posts are comming through,hope you can read this as i dont know how to make larger sorry RON. ken ct.

06-12-2010, 01:32 PM	#5
Dennis/Arkansas Senior Member Join Date: May 2010 Location: Lead Hill, Arkansas Posts: 237	Re: Need alittke help Hey Ken, If you want to make larger size print don't do a "Quick Reply'. Instead go to "Post Reply". On the top row of message box there is a tab for "Sizes" right next to "Fonts" (style of print) Good Luck, Dennis/Arkansas

06-12-2010, 01:48 PM	#6
blown49 Senior Member Join Date: May 2010 Location: West Union, Ohio Posts: 113	Re: Need alittke help Sponsored Links (Register now to hide all advertisements) Ron, PM's are private messages. On the right side of the page, near the top it'll say Welcome Ron. Just below that is a listing for Private Messages: Unread__, Total__ . Click on that to view a private message sent to you by another member. After viewing you can send a message back to the sender. Hope this helps Ron, Jim __________________ Visit my Blown '49 Merc website @ http://www.blown49.com

06-12-2010, 02:36 PM	#7
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,870	Re: Need alittke help All right this is good info. I did find the PM by accident.. My next question is kind of stupin, but how do you post a new message?

06-12-2010, 03:50 PM	#8
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,870	Re: Need alittke help That's just it, it doesn't go.

06-12-2010, 03:53 PM	#9
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,870	Re: Need alittke help I just ran a test and it didn't post.

06-12-2010, 04:41 PM	#10
55 dude Senior Member Join Date: May 2010 Posts: 359	Re: Need alittke help worked for me! hey ron you still have your "mobile shoutout"!

06-12-2010, 05:25 PM	#12
Craig CT Senior Member Join Date: May 2010 Location: Sherman, CT Posts: 330	Re: Need alittke help Hi Ron; It's all a process and you keep improving. Alot of the guys here are very helpful. Happy motoring, Craig. PS Did your grandson set up that visor ?

06-12-2010, 08:15 PM	#13
redfor40 Senior Member Join Date: May 2010 Location: indiana Posts: 99	Re: Need alittke help i got this and the test doing good