The Ford Barn

fordfixer · 02-23-2011, 07:20 PM

I was wondering what you guys from the T Club think of using (TimeSaver) compound on the babbit bearings. I have my main caps off. Engine is on a stand. I have bearings showing less than 50 per cent contact. This is from an A model. Any thoughts would be appreciate. Jon

Doug Money · 02-23-2011, 07:59 PM

Sponsored Links (Register now to hide all advertisements)

It works good. It will fit the bearings right up for you.

02-23-2011, 07:20 PM	#1
fordfixer Senior Member Join Date: May 2010 Location: Crete, Illinois Posts: 296	Babbit bearings I was wondering what you guys from the T Club think of using (TimeSaver) compound on the babbit bearings. I have my main caps off. Engine is on a stand. I have bearings showing less than 50 per cent contact. This is from an A model. Any thoughts would be appreciate. Jon

02-23-2011, 07:59 PM	#2
Doug Money Senior Member Join Date: Jul 2010 Posts: 350	Re: Babbit bearings Sponsored Links (Register now to hide all advertisements) It works good. It will fit the bearings right up for you.