|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-29-2011, 10:28 PM | #1 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 855
|
Oil Pressure guage to deal with 80lbs?
I am installing a rebuilt high performance 59A block in my 35 Ford and the oil will be pumping at 80lbs. Is there a stock looking sender unit that I can use to report the pressure at a reduced rate proportionately - so if the engine has 80lbs - the gauge will show 40lbs so so I can see oil pressure but don't peg the needle on the stock guage?
|
05-29-2011, 11:15 PM | #2 |
Senior Member
Join Date: May 2010
Location: new zealand
Posts: 1,054
|
Re: Oil Pressure guage to deal with 80lbs?
why not run a modern gauge plus have your original 1 hooked up as well
|
Sponsored Links (Register now to hide all advertisements) |
|
05-29-2011, 11:42 PM | #3 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,828
|
Re: Oil Pressure guage to deal with 80lbs?
Use the 80 lb sender unit in conjunction with your stock 50 lb gauge. Brian
|
05-31-2011, 08:54 PM | #4 |
Junior Member
Join Date: Apr 2011
Posts: 3
|
Re: Oil Pressure guage to deal with 80lbs?
Sponsored Links (Register now to hide all advertisements)
Marv |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|