Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-27-2022, 09:43 AM   #1
Nlbloch
Member
 
Join Date: Apr 2011
Posts: 70
Default Stuck motometer radiator cap

I have a Ford script motometer with the temperature gauge showing through a small window. The upper half of the cap seems to be stuck to the lower half, such that the entire motometer housing comes off the radiator when I try to open it. I’ve removed it and tried to open, cleaned the rust, tried WD-40 to lubricate the turn — no luck. I do not get any movement when trying to compress the two halves, which I know is needed to “unlock” and allow the turn.

Any suggestions?
Nlbloch is offline   Reply With Quote
Old 04-27-2022, 10:58 AM   #2
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,103
Default Re: Stuck motometer radiator cap

Put the motometer in a vise with protected jaws and use a strap wrench to free it.

Don't use wd40, instead use a 50/50 mix of automatic trans fluid and acetone.

https://www.harborfreight.com/rubber...SABEgL6IPD_BwE
old31 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-04-2022, 11:00 AM   #3
Nlbloch
Member
 
Join Date: Apr 2011
Posts: 70
Default Re: Stuck motometer radiator cap

Sponsored Links (Register now to hide all advertisements)
Thanks for the suggestions. Still stuck. I’m giving up on this style of cap and going back to the flat top.
Nlbloch is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:11 AM.