06-16-2012, 11:32 AM
|
#1 |
|
Junior Member
Join Date: Aug 2011
Posts: 7
|
T85 R11 Overdrive Governor Gear
I have a 57 unit and not sure how many teeth the governor should have. Currently I have a 18 tooth governor gear and I think 10 tooth worm gear on the main shaft that does not mesh. I found a 14 tooth governor gear on Ebay but has not arrived. Any help on this would be appreciated, and any leads on the correct gear also appreciated.
Thanks, Richard |
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 07:50 PM.