The Ford Barn

flathead 53 · 08-13-2023, 12:32 PM

looking for front end alignment specs for A 1967 fairlane 500 with manual steering.

cadillac512 · 08-13-2023, 03:14 PM

stock Ford Specs were:

0 +-1 Deg Caster (A couple degrees more is better if you can get it)

+ 1/4 +-3/4 Deg Camber

1/8" Toe-In

Maximum diff between wheels not to exceed 1/2 deg

55blacktie · 08-13-2023, 03:48 PM

Emphasis on "stock."

Ole Don · 08-14-2023, 06:00 AM

Sponsored Links (Register now to hide all advertisements)

If you can find a really good front end man, he will tell you the stock specs are only a suggestion.

08-13-2023, 12:32 PM	#1
flathead 53 Senior Member Join Date: Jul 2011 Location: central nj Posts: 717	1967 fairlane,front end alignment specs looking for front end alignment specs for A 1967 fairlane 500 with manual steering.

08-13-2023, 03:14 PM	#2
cadillac512 Senior Member Join Date: Apr 2019 Location: Kansas Posts: 922	Re: 1967 fairlane,front end alignment specs stock Ford Specs were: 0 +-1 Deg Caster (A couple degrees more is better if you can get it) + 1/4 +-3/4 Deg Camber 1/8" Toe-In Maximum diff between wheels not to exceed 1/2 deg __________________ "It don't take but country smarts to solve the problem" (Smokey Yunick) '41 Merc Town Sedan / 260" 8CM engine '66 Fairlane four door / "warmed up" 302

08-13-2023, 03:48 PM	#3
55blacktie Senior Member Join Date: Aug 2020 Posts: 442	Re: 1967 fairlane,front end alignment specs Emphasis on "stock."

08-14-2023, 06:00 AM	#4
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: 1967 fairlane,front end alignment specs Sponsored Links (Register now to hide all advertisements) If you can find a really good front end man, he will tell you the stock specs are only a suggestion.