|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-16-2015, 07:32 PM | #1 |
Senior Member
Join Date: May 2012
Location: Klawock, AK/Kanab, UT
Posts: 301
|
Rubber and Glass
Anybody know if there is a difference between Dennis Carpenter and Bob Drake on rubber and glass for 40 passenger cars or does one of them make the products for all the vendors? Any recommendations or caveats are appreciated.
|
12-16-2015, 07:49 PM | #2 |
Senior Member
Join Date: Feb 2011
Location: Buchanan, MI
Posts: 676
|
Re: Rubber and Glass
In my experience when it comes to '40 Ford window rubber, GO WITH BOB DRAKE.
Rubber window products from Carpenter just do not fit. Do yourself a favor & do a search on the Ford Barn on this subject. Last edited by 42merc; 12-16-2015 at 09:25 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
12-16-2015, 08:04 PM | #3 |
Senior Member
Join Date: Jun 2011
Location: central Iowa
Posts: 484
|
Re: Rubber and Glass
Buy all the seals from every vendor and compare. Return the rejects.
It's some hastle I know but it's the only way to be sure of getting the best available.
__________________
Louvering, bias ply tire-truing, metal shaping and forming, lathe and mill work, member shop HAGERTY Ins. expert repair network. High quality paint work in Iowa. |
12-16-2015, 08:07 PM | #4 |
Senior Member
Join Date: May 2012
Location: Klawock, AK/Kanab, UT
Posts: 301
|
Re: Rubber and Glass
Thanks for the tip. Actually I did do a search and didn't find the answer I was looking for. I seem to have a problem getting the info I want out of a search which I figure is related to my senility/ dementia.
|
12-17-2015, 10:15 AM | #5 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: Rubber and Glass
On window rubber I always use Drake. Much more pliable and fits better.
|
12-17-2015, 10:33 AM | #6 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,015
|
Re: Rubber and Glass
Sponsored Links (Register now to hide all advertisements)
All of the other seals? Shop price as they are identical in quality. Typically Carpenter is more reasonable, especially when considering shipping fees. Carpenter charges a flat rate shipping fee. Drake? Well, he states he charges what he is charged PLUS a dubious $2 delivery warranty. I tend to disbelieve his claim as I can ship the same package to him time and again for about 1/2 - 2/3 the cost he charges. By the way, Drake's floor board seals are terrible. Not certain if anyone else makes them.
__________________
"I can explain it for you. However, I can't understand it for you". |
|
|
Sponsored Links (Register now to hide all advertisements) |
|