'31 Model A Vicky Slant Windshield Cowl

[Dragfink]

Pretty clean, straight, Vicky cowl...minumum rust, check out the pics, a little on the bottom of each cowl side, and a minor amount on the right side windshield post...

Firewall is nice except for an extra 2" hole on the lower right side...unfortunately, someone years ago torched the hinges, the stubs are still bolted to the cowl, no damage to the cowl itself...all subrail brackets look good...

Gas tank is in it and in good shape...includes the inside windshield post garnish moldings, and the filler piece that goes below the windshield frame, mounting brackets for cowl lamps are there too...

Pic with the doors is to show the slanted windshield posts, the doors aren't included...

Can also be used for a slant windshield Cabriolet, A400, or slant windshield sedan...

Located at my shop, approx. 25 miles north of Detroit, don't want to ship this, but I'll help with a relay...$450...PM any questions...thanks

[Dragfink]

I have the front doors from a 4-dr. slant w/s sedan available, (the modified one's in the pic) also, if you're looking to build a slant windshield modified roadster pickup cab...

...doors are very clean, and have the regulators and latches, (no glass)...

...$200 for the pair...

[USE2WALK]

Originally Posted by Dragfink

I have the front doors from a 4-dr. slant w/s sedan available, (the modified one's in the pic) also, if you're looking to build a slant windshield modified roadster pickup cab...

...doors are very clean, and have the regulators and latches, (no glass)...

...$200 for the pair...

Would you sell the door latchs? Need door latchs for a 31 Victoria.

[Dragfink]

BTTT...price reduced...$400 for cowl & doors...

[Dragfink]

SOLD...thanks Vaughn