07-09-2012, 07:23 AM
|
#1 |
|
Member
Join Date: May 2010
Location: Texas
Posts: 97
|
32 style dash in a 31 model A
Plan to put a 32 style dash in my 31. There are two different ways you can do this and two differen after market dashes you can buy. One is a partial 32 dash that slips behind the 31 dash rail and bolts behind the 31 rail. The other is a complete 32 style dash that bolts in the 31 holes. Has any one done this and which is the best approach. Thanks, Jim
|
|
|
|
07-09-2012, 12:00 PM
|
#2 |
|
Member
Join Date: Jan 2012
Location: Camden, maine
Posts: 67
|
Re: 32 style dash in a 31 model A
I used the Brookville unit, nicely made, screws in using all the original screws
|
|
|
|
|
07-10-2012, 08:52 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Lewisburg,PA
Posts: 508
|
Re: 32 style dash in a 31 model A
OOh, hot rod! I have no problem with that, but you'd probably get more and more complete answers over on the HAMB.
__________________
"I want them all to say, as they file out the gate, 'Well, old Barney—he was goin’ some!’”. Barney Oldfield |
|
|
|
|
07-11-2012, 09:40 PM
|
#4 |
|
Member
Join Date: May 2010
Location: Texas
Posts: 97
|
Re: 32 style dash in a 31 model A
thanks my friend.
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Linear Mode
|
|
All times are GMT -5. The time now is 02:53 PM.