|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-27-2021, 09:07 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 105
|
39 Pickup Windshield Regulator
What is the secret to removing the 2 front bolts on the w/s regulator? I've tried all kinds of sockets but unable to find anything that works due to clearance problems. Any suggestions would be appreciated. I'm at the point where I'm considering cutting some metal to gain clearance.
|
03-27-2021, 09:54 AM | #2 |
Senior Member
Join Date: May 2010
Location: Beaver Dam, Wisconsin
Posts: 821
|
Re: 39 Pickup Windshield Regulator
I'm assuming you are trying to remove the mounting bolts under the dash? On my pickup it was very difficult to get at the bolts. Used my 1/4" drive socket and extension and was barely able to do the job. Maybe remove the regulator knob and loosen the dash screws as well. What vehicle is this? Passenger car or commercial?
|
Sponsored Links (Register now to hide all advertisements) |
|
03-27-2021, 11:31 AM | #3 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 39 Pickup Windshield Regulator
In similar cases I have used a cheap socket and ground the wall down to get the clearance. It is a trial and error process.
|
03-28-2021, 10:42 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 105
|
Re: 39 Pickup Windshield Regulator
Gary U. It's a 39 Ford 1/2 ton. The bolts are not under the dash but in the front surrounded by obstacles.
|
03-28-2021, 10:46 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 105
|
Re: 39 Pickup Windshield Regulator
J.Seery, thanks, I had that thought about making a shorter socket. I'm going to try it tomorrow. Raining here today. I don't see any other option other than making some cuts in the front, bending the metal to get clearance and then re-welding later.
|
03-28-2021, 01:06 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 39 Pickup Windshield Regulator
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|