|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-30-2022, 11:31 PM | #1 |
Junior Member
Join Date: Jun 2015
Posts: 29
|
1930 Murray Exterior Door Key
Have remove lock and there is a number on the shaft No. A1102.
Don't know if this is key number? If so can I get a new key? |
10-31-2022, 04:06 AM | #2 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,955
|
Re: 1930 Murray Exterior Door Key
Dick Crabtree does excellent work.
POB 33 Pickstown SD 57367 US (605) 487-7229 Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
10-31-2022, 07:19 AM | #3 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 583
|
Re: 1930 Murray Exterior Door Key
I had a ignition lock with the A**** number and took it to a lock shop and they looked it up on their cards and made me a key right away. Try a lock shop and you should have success.
|
10-31-2022, 03:21 PM | #4 |
Junior Member
Join Date: Jun 2015
Posts: 29
|
Re: 1930 Murray Exterior Door Key
|
10-31-2022, 11:47 PM | #5 |
Junior Member
Join Date: Jun 2015
Posts: 29
|
Re: 1930 Murray Exterior Door Key
Hello, Had local Locksmith make two keys for this outside door lock bit of trouble installing it until I put a wire though lock and into shaft end which help line the shaft up when pushing lock into door. Lock now works as it should.
|
11-01-2022, 12:48 AM | #6 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,564
|
Re: 1930 Murray Exterior Door Key
Sponsored Links (Register now to hide all advertisements)
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
11-01-2022, 01:41 AM | #7 |
Junior Member
Join Date: Jun 2015
Posts: 29
|
Re: 1930 Murray Exterior Door Key
Synchro909,
Didn't seem to be a problem asked how many keys I wanted. Cheers Graeme |
11-01-2022, 04:23 AM | #8 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,955
|
Re: 1930 Murray Exterior Door Key
Agreed. I had a key and just wanted a duplicate made so I would have a spare. Our best lock shop in the area didn’t have a way to get a blank. They butchered a similar key blank and fudged it enough to make it work. It was an ugly mess. Sent from my iPhone using Tapatalk |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|