|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-13-2024, 03:35 PM | #11 |
Senior Member
Join Date: May 2010
Posts: 2,174
|
Re: 47 V8 ignition mystery
Brian>>tried everything to no avail, culminating with removing the intake manifold and applying grease to both sides of the gasket and rebolting it down which cured the problem!>>
Also a good possibility. IMO, smearing wheel bearing grease on all 4 gasket, block & manifold surfaces is where it's at (except exhaust). As a quickie test for vacuum leaks --- when engine seems to be missing, try spraying WD-40 or smearing grease on manifold edges around problem cylinders to see if it tries to smooth out. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|