|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-29-2019, 04:38 PM | #1 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 302
|
33/34 body fixing query.
I have a Roy Nacewicz 33/34 body mounting kit.
The fastenings supplied for the wheelhouse to frame kickup (2 per side) do not appear to be correct. Supplied are 5/16" - 7/8" carriage bolts where the heads are supposed to face outwards. Looking at original vehicles that I have seen they all have hex bolts with large 1 1/2" washers on the outside which fit into slight recesses. If the washer system is correct? the finish would be cadmium? Thanks Graham |
|
|
Sponsored Links (Register now to hide all advertisements) |
|