|
|
|
|
#1 |
|
Senior Member
|
Are 42-48 Ford rear fenders dimensionally the same for all body styles so as to interchange?
|
|
|
|
|
|
#2 |
|
Senior Member
Join Date: Jun 2011
Location: Vermont
Posts: 161
|
Hi, I know that 42-48 rear fenders for Woodies are quite different in that they bolt to the wooden wheel arches in the rear. The top edge is a little broader and flat in this location on the fender. I'm not sure about the fender length but I'd guess the Woodies might be a bit longer. Toby
|
|
|
|
|
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 825
|
All passenger cars use the same fender. The woodie fenders only fit a woodie. They bolt up different , are a little longer and have a different curve. The gas door for a woodie fender is not the same as the gas door on a passenger fender.
|
|
|
|
|
|
#4 |
|
Senior Member
Join Date: Jun 2010
Location: North of Minneapolis, MN
Posts: 159
|
All rears are not the same from year to year. There are differnent opening sizes in the rear of the fender where the bumper braces come out. Those are also different from year to year
|
|
|
|
|
|
#5 |
|
Senior Member
Join Date: May 2010
Posts: 157
|
sedan delivery rears look like woodie rear fenders but are not as "fat" when viewed from above..
sportsman uses sedan delivery stampings however with the addition of a gas door on the driver side rear fender.. to my knowledge all other body styles are the same
__________________
looking for any 1946 - 1948 ford sportsman / convertible parts.. |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|