|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-14-2012, 08:59 PM | #1 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
Need 29 Sedan measurements please
Hey guys, I'm hoping someone out here has body dimensions for my 29 Tudor Sedan. Body is all stock, no wood involved.
I'm particularly interested in left-right measurements above the roof edges and getting my door alignments right. My right side front-roof area is splayed out some, windshield area seems fine. Any suggestions? Thanks! John
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... |
04-15-2012, 08:52 PM | #2 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
Re: Need 29 Sedan measurements please
Anybody? I assume the front upper roof edges are parallel ahead of the doors? Or do they taper inwards some?
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... |
Sponsored Links (Register now to hide all advertisements) |
|
04-16-2012, 09:04 AM | #3 |
Member
Join Date: May 2010
Location: grass valley ca.
Posts: 75
|
Re: Need 29 Sedan measurements please
on my 31 2 dr. they taper down to where meet the top of the door. reguards dick t.
|
04-15-2012, 09:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: Need 29 Sedan measurements please
You might have better luck on the Model A Forum.
|
04-15-2012, 09:11 PM | #5 |
Member
Join Date: Jul 2011
Location: Pewaukee, WI (Milwaukee)
Posts: 50
|
Re: Need 29 Sedan measurements please
I have a 29 tudor that i can measure, but i don't really understand what you need.
|
04-16-2012, 01:33 AM | #6 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
Re: Need 29 Sedan measurements please
Sponsored Links (Register now to hide all advertisements)
|
04-16-2012, 08:04 AM | #7 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
Re: Need 29 Sedan measurements please
I just want to verify that the front roof pieces remain parallel along the roof edge, as opposed to tapering inwards. Is it a straight shot from the doors forward?
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... |
04-16-2012, 07:31 PM | #8 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
Re: Need 29 Sedan measurements please
OK, that's what I did too. Everything else seems right on so far! Now I just gotta get past my surgery and get back on things!
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... |
04-17-2012, 01:46 AM | #9 |
Senior Member
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,242
|
Re: Need 29 Sedan measurements please
The outer edge tapers towards the front pillar, exactly as the top edge of the door does.
|
04-17-2012, 03:12 AM | #10 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,798
|
Re: Need 29 Sedan measurements please
If you think the one side looks all right, you can string a center line down the center and make the bad side match the good side.
Mart. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|