|
|
05-27-2010, 01:54 PM
|
#1 |
|
Junior Member
Join Date: May 2010
Posts: 3
|
Wanted Victoria Drip Rails Window Frames
City:
Waukegan
State:
IL
Like the Title says we need drip rails and garnish mouldings for a LeatherbackVictoria. Any leads would be appreciated.
Thanks Donny Last edited by dontlifttoshift; 05-28-2010 at 08:46 AM. Reason: Being more specific |
|
|
|
05-27-2010, 06:34 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 511
|
Re: Wanted Victoria Drip Rails Window Frames
I take it you have a leather back victoria and need drip rails they are pretty hard to find I use tudor drip rails and make a plywood pattern of the bent in the rear heat the rail up and very carefully bend the drip rail around your pattern. on the garnish moldings which ones do you need I have some. John Hash 253 833 9364
|
|
|
|
|
06-10-2010, 11:37 AM
|
#3 |
|
Junior Member
Join Date: May 2010
Posts: 3
|
Re: Wanted Victoria Drip Rails Window Frames
Bump...still looking for stuff. Found some from John Hash.
Thanks |
|
|
|
|
06-11-2010, 08:31 AM
|
#4 |
|
Member
Join Date: May 2010
Posts: 33
|
Re: Wanted Victoria Drip Rails Window Frames
Donny,
I have a passenger side door window frame that is decent, and a driver side door window frame that is missing the top rail and has some rust holes in the front section. I also have a passenger side door garnish molding that is in fair condition. If you are interested I can send photos. Kirk Mohney Gardiner, Maine 207-582-8040 |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -5. The time now is 12:47 AM.