The Ford Barn

Don · 08-10-2011, 06:30 PM

Are the composit head gasket reuseable after one compression ,only been run about 10 minutes?

Russ/40 · 08-10-2011, 06:38 PM

Definitely not if you used any sealer. Some have got away with it, but I wouldn't even try.

Ol' Ron · 08-10-2011, 07:05 PM

Sponsored Links (Register now to hide all advertisements)

You probably won;t get them off in one piece. I've reused the copper asbestos gaskets dozens of times.

08-10-2011, 06:30 PM	#1
Don Senior Member Join Date: May 2010 Location: Ashland KY Posts: 1,159	composit head gaskets Are the composit head gasket reuseable after one compression ,only been run about 10 minutes? __________________ DON P

08-10-2011, 06:38 PM	#2
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: composit head gaskets Definitely not if you used any sealer. Some have got away with it, but I wouldn't even try.

08-10-2011, 07:05 PM	#3
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,896	Re: composit head gaskets Sponsored Links (Register now to hide all advertisements) You probably won;t get them off in one piece. I've reused the copper asbestos gaskets dozens of times.