|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-09-2024, 11:03 PM | #1 |
Member
Join Date: Jun 2013
Location: Southeast Michigan
Posts: 52
|
Coupe Body Panel Joining
Hi. I have a 29 coupe that I disassembled, a little too far, 25 years ago. After starts and stops and getting the chassis done, I am making another push on the body. I wasn't in a club then, and if I was I'd have done things differently. But alas, here I am. To keep it simple, Where can I find instructions or diagrams on how all the body parts join together via metal, wood, nails, screws, and what spacers if any go between things? For example, I have the top right and left wood for the cabin, and the roof panels sitting on top of the thin steel strip that connects the top of the A-pillar to the B-pillar. The metal has round and square holes in it. The wood has no vertical holes. I need a reference that shows how the roof panel is attached to the wood, and how that assy is attached to the top metal that connects the A to the B-pillar........and how every other body panel attaches to whatever it attaches to. Can anyone point me to such a reference? I have pictures I took and some books that show exploded views of the body and wood, but nothing this specific.
|
02-10-2024, 10:43 AM | #2 |
Senior Member
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 1,174
|
Re: Coupe Body Panel Joining
Sponsored Links (Register now to hide all advertisements)
You might be able to get it from the Frod Archives. I've tried to get into that site a couple of times with no luck. |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|