Unknown Ford Rocker Moulding Trim ?

[mercman from oz]

Unknown Ford Rocker Moulding Trim ?
Can someone identify what year Ford this Rocker Moulding Trim is for?
It is 2 Metres long = 6.56 Inches
Notice that both ends are identical.

Correction I omitted listing the 6 Feet in front if the Inches.
Length is 6 Feet & 6.56 Inches

Sorry about this confusion

[paul2748]

Looks like the trim on a 46-48 Ford glove box lid. Size would be about right.

[mercman from oz]

Hi Paul, You missed reading the Measurements of this Trim Piece.
It is just over 5 Feet Long. Regards Mercman <><

[mercman from oz]

Overall shot of this Unknown Ford Rocker Moulding Trim Piece

[mercman from oz]

I can see the likeness
This is a 1947 Ford Glove Box Trim Piece

[Stiggy]

Sponsored Links (Register now to hide all advertisements)

Hi merman, I've measured 1 off my Crown Victoria ~ it's 2020 meters from the longest point ( 6' 7 and 1/2 inches ) It looks the same as the one in your photo. It's 3 and 3/16 inches wide. PS ~ 205 meters is 6' 6 and 7/8 inches.. Cheers ~ stiggy..

[paul2748]

U said it was 6.56 inches long - am I supposed to do a metric conversion?

Originally Posted by mercman from oz

Hi Paul, You missed reading the Measurements of this Trim Piece.
It is just over 5 Feet Long. Regards Mercman <><

[mercman from oz]

Paul, My mistake, I omitted adding the 6 Feet in front of the Inches.
Length 6 Feet & 6.56 Inches.
I have since corrected my original Post. Regards Mercman <><

[Abe Lugo]

Similar to 64-66 ford mustang

[mercman from oz]

Thanks Abe Lugo for your suggestion.
This is the Rocker Moulding on early Mustang.
It looks similar but the smooth area on the top of mine is wider.

[scicala]

Not sure how long mine was. but looks the same as on the '55 Mercury Montclair I used to have.

Sal