|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jul 2017
Location: Spokane, Washington state
Posts: 254
|
![]()
I have lost track of progress on these to know if they have been made by anyone and available to purchase.
I need a set for my top install and wondered if any are available at all now? I didn't find them in the swap section recently. Thanks
__________________
68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2010
Location: Aiken, South Carolina
Posts: 695
|
![]()
Yeah I could use these myself. Best I recall, Bill Underwood was going to give it a go to try some repros but last I heard he wasn't happy with them. This was maybe a couple years ago (I lose track of time)? Maybe he can report in.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,394
|
![]()
It was me that was attempting to make/get them made
My attempt at dies was not acceptable I’ve found no one that can/will make the dies The project is very stalled.....maybe dead but not in the ground yet. You’d think with all the technical innovations..3D printers and all.. And I was attempting C not B |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2010
Location: Oslo, Norway
Posts: 522
|
![]()
Where dis Bob Andersons' dies go ?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 2,040
|
![]()
I have a 3-d printer ( a little cheap one) but I have yet to connect it up, and learn how to use it. some day....
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,394
|
![]() Sponsored Links (Register now to hide all advertisements)
Terry Deters did his cabriolet and he doesn’t have the dies. Gary Johnson helped and we just hit a dead end. Gary had gone to Bobs after he passed. Been a long time Probably in a dump or scrapped John Hash was going to give it a try but the retired machinist he was counting on came up with issues |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Oct 2015
Posts: 8
|
![]()
Check out the latest edition of the Cabriolet News Letter Cabrioletter #185
Great Article on the Welting Tips. They are soon to be available!! |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|