|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-14-2014, 09:19 PM | #1 |
Senior Member
Join Date: Jan 2014
Location: Atlanta, GA
Posts: 488
|
'41 pickup hood latch
The '41 pickup hood is apparently different than the '40 in that the latch handle extends down over the top of the center grill area. Right here:
DSCN2220.jpg I am trying to find the correct hood latch but am not sure what it looks like. The following pictures are examples. The following two are reported to be for a 1940: 1940 hood release.jpg This is out of the Bob Drake catalog. but is the picture accurate? Alt 1940 hood release. honest Char.jpg This is supposed to be a 1941: 1941 bdrake hood release.jpg This is supposed to be a 1941 bdrake 41 hood release.jpg The '41 hood latch looks like it is supposed to be about 7 3/8-inches long. Clarifications please, better pictures possibly... |
03-14-2014, 10:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: Canada
Posts: 571
|
Re: '41 pickup hood latch
the last two are '41
|
Sponsored Links (Register now to hide all advertisements) |
|
03-15-2014, 07:17 AM | #3 |
Senior Member
Join Date: Jan 2014
Location: Atlanta, GA
Posts: 488
|
Re: '41 pickup hood latch
Thanks oldrelics.
Ken |
03-15-2014, 04:45 PM | #4 |
Senior Member
Join Date: May 2010
Location: Larry Young, Tulsa, OK
Posts: 202
|
Re: '41 pickup hood latch
We recently discussed this see:
https://www.fordbarn.com/forum/showthread.php?t=132399 Recently I noticed the hardware under the hood is also different on some old hooods I have. Does the under hood hardware have to match the outer latch or can you use the underhood hardware from a 40 with the outer latch from a 41 or vice versa? |
03-15-2014, 10:08 PM | #5 |
Senior Member
Join Date: May 2010
Location: Hansville, WA
Posts: 778
|
Re: '41 pickup hood latch
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|