The Ford Barn

V4F · 11-23-2011, 07:37 PM

does anyone know what these are for ?? .. thank you .. steve

Clem Clement · 11-23-2011, 07:41 PM

The lower left is a water pump wrench. The others look very thin and therefore not for heavy use. The big one could be a hubcap wrench I guess.
clem

68HILLBILLY · 11-23-2011, 08:14 PM

one on far right looks a lot like an old MAYTAG wrench. the one I have is very similar but does say MAYTAG on it.

RcT · 11-23-2011, 08:30 PM

Could be some bicycle wrenches in there, too. Bicycles have some very thin nuts on the hubs.

MikeK · 11-23-2011, 10:18 PM

The one in the middle looks just like the wrench with my early '50's worm drive Skilsaw.

James Rogers · 11-24-2011, 06:02 AM

Sponsored Links (Register now to hide all advertisements)

Far left and middle are the same wrench. The one on the far left is bent double. Both look like Model T hub cap wrenches. The big end is for the hub cap and the little end is for the nut on the spindle to remove the wheel on non demountables.

eeyore · 11-24-2011, 07:40 AM

The one on the right looks more like it is used on a spray paint gun

11-23-2011, 07:37 PM	#1
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,522	Wierd wrenches does anyone know what these are for ?? .. thank you .. steve __________________ V4f

11-23-2011, 07:41 PM	#2
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,406	Re: Wierd wrenches The lower left is a water pump wrench. The others look very thin and therefore not for heavy use. The big one could be a hubcap wrench I guess. clem

11-23-2011, 08:14 PM	#3
68HILLBILLY Member Join Date: May 2010 Location: kingston ky Posts: 99	Re: Wierd wrenches one on far right looks a lot like an old MAYTAG wrench. the one I have is very similar but does say MAYTAG on it.

11-23-2011, 08:30 PM	#4
RcT Senior Member Join Date: May 2010 Posts: 451	Re: Wierd wrenches Could be some bicycle wrenches in there, too. Bicycles have some very thin nuts on the hubs.

11-23-2011, 10:18 PM	#5
MikeK Senior Member Join Date: May 2010 Location: Windy City Posts: 2,919	Re: Wierd wrenches The one in the middle looks just like the wrench with my early '50's worm drive Skilsaw.

11-24-2011, 06:02 AM	#6
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Wierd wrenches Sponsored Links (Register now to hide all advertisements) Far left and middle are the same wrench. The one on the far left is bent double. Both look like Model T hub cap wrenches. The big end is for the hub cap and the little end is for the nut on the spindle to remove the wheel on non demountables.

11-24-2011, 07:40 AM	#7
eeyore Senior Member Join Date: Sep 2010 Location: MADISON, OHIO Posts: 134	Re: Wierd wrenches The one on the right looks more like it is used on a spray paint gun