View Single Post
Old 04-05-2012, 12:42 PM   #8
Barry B./ Ma.
Senior Member
 
Barry B./ Ma.'s Avatar
 
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
Default Re: Alignment Camber Problem

I had one once like that and it was a bent spindle probably from slamming a curb sideways at some time. I would say to check the spindle first, if ok then I would look for a good axle. I bought a nice axle awhile ago for $30.
Barry B./ Ma. is offline   Reply With Quote