02-24-2013, 03:12 PM
|
#12
|
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,033
|
Re: 1939 Ford Package Tray Question
Quote:
Originally Posted by FatFndr
I am trying to build the package tray for a 1939 Ford Coupe and have a reference 1940 Coupe for comparison. The wooden piece for 1940 Ford package tray fits in place nicely (it's an original). With the package tray installed, it is 1" short of covering the middle wooden piece and 2 7/8" short on each side. Since the reference car and my car are both in pieces, neither the owner nor I know what fills this gap. What information am I missing to complete this part of my build?
|
From the dimensions you'd offered me it appears your tray is short 1" (front to back) as it should be 17 1/2".
So, if the curve appears to fit nicely, I'd suggest you cut another board, same curve but extend 1" forward.
The width you'd offered was correct at 53 3/4". You mention yours is considerably short on each side. If that is the case, there is something amiss within the metal (package tray) framing of your car.
__________________
"I can explain it for you. However, I can't understand it for you".
|
|
|