View Single Post
Old 02-12-2013, 03:50 PM   #5
bobscogin
Senior Member
 
Join Date: May 2010
Posts: 248
Default Re: V8 clutch problem

Quote:
Originally Posted by Rowdy View Post
I also noticed this is the 8n/9n tractor pressure plate without the flyweights. Rod
Thanks for the input. I've been able to determine from a measurement given to me by Dick Spadaro that my flywheel is indeed one for the 9" clutch. The problem is that the pressure plate is incorrect. I'ts going back to the vendor tomorrow. Good catch on the flyweights. Not ever having seen a "real" 9" Ford car clutch I overlooked their absence. Makes sense that a very low rpm tractor engine wouldn't benefit from them.

Bob

Last edited by bobscogin; 02-12-2013 at 03:56 PM.
bobscogin is offline   Reply With Quote