The Ford Barn - View Single Post

PeteVS · 06-13-2010, 02:05 PM

About the hub puller: I borrowed a friend's KRWilson REPLICA puller. What a nice tool! It's well worth the money if you don't have someone to borrow one from like I did. (Thanks again Bruce!)

PS: I figure that you probably want to keep the wide 5 wheels and drums, but if the drums are shot and you don't mind changing out the wheels, get the new made in USA drums that can be slid off the studs when you remove a wheel. It will make brake exams and maintenance a breeze without having to pull those hubs.

06-13-2010, 02:05 PM	#3
PeteVS Senior Member Join Date: May 2010 Location: FP, NJ Posts: 2,770	Re: Replacing axle seals 39 ford About the hub puller: I borrowed a friend's KRWilson REPLICA puller. What a nice tool! It's well worth the money if you don't have someone to borrow one from like I did. (Thanks again Bruce!) PS: I figure that you probably want to keep the wide 5 wheels and drums, but if the drums are shot and you don't mind changing out the wheels, get the new made in USA drums that can be slid off the studs when you remove a wheel. It will make brake exams and maintenance a breeze without having to pull those hubs. __________________ Don't never get rid of nuthin! Last edited by PeteVS; 06-13-2010 at 02:08 PM. Reason: Added PS